Experimental study on heat transfer limit of high temperature potassium heat pipe for advanced reactors. (February 2021)

• Record Type: Journal Article
• Authors: Wang, Chenglong; Liu, Xiao; Liu, Minghao; Tang, Simiao; Tian, Zhixing; Zhang, Dalin; Tian, Wenxi; Qiu, Suizheng; Su, Guanghui.
• Is Part Of: Annals of nuclear energy. Volume 151(2021)
• Publication Date: 2021-02
• Subjects: Heat piped cooled reactor -- High temperature heat pipe -- Experimental study -- Heat transfer performance and limit; Nuclear energy -- Periodicals; Nuclear engineering -- Periodicals; 621.4805
• DOI: 10.1016/j.anucene.2020.107935
• Languages: English
• ISSNs: 0306-4549

Abstract

Highlights: Experimental study on heat transfer limit of potassium heat pipe is conducted. Effect of heating power and inclination angle on heat transfer performance is considered. Viscosity, sonic, entrainment and condensation limits of heat pipe are analyzed. Abstract: Heat pipe cooled reactor (HPR) is widely applied in various environment due to its remarkable advantages compared with other nuclear power systems, such as high reliability, low noise level and compact structure. As one of the essential components in HPR, the high temperature heat pipe has an important effect on HPR operation performance. In this paper, an experimental study was carried to investigate the thermal–hydraulic characteristics and heat transfer limit of potassium heat pipe. Under the steady-state conditions, heating power and inclination angle of heat pipe were taken as sensitivity parameters. By increasing heating power, the heat transfer capacity was enhanced. For inclination angle, an increase in inclination angle would enhance heat transfer for low filling ratio heat pipe, while it does not make obvious effect on high filling ratio heat pipe. As for heat transfer limit, by analyzing the axial wall temperature distribution and predicting the vapor flow pressure drop, the particular phenomena is classified to four heat transfer limits including viscosity, sonic, entrainment and condensation limit. When heat pipe is cooled by natural air convection, the accurate prediction of condensation limit under effect of inclination is performed by air convection heat transfer relationship. Because of the friction force influence on viscosity limit when operating at low temperature state, the temperature at inlet of condenser section is 11℃ lower than adjacent position. The same reason for sonic limit when operating at low temperature state, the temperature at outlet of evaporator section is 17 ℃ higher than adjacent position. The occurrence of local dryout which lead evaporator temperature increasing sharply to 632 ℃ is entrainment limit. The experimental results provide guidance for the engineering application of high temperature heat pipe.