Effect of suspension characteristics on the performance of thermal barrier coatings deposited by suspension plasma spray. Issue 1 (1st January 2021)

• Record Type: Journal Article
• Authors: Ganvir, Ashish; Gupta, Mohit; Kumar, Nitish; Markocsan, Nicolaie
• Is Part Of: Ceramics international. Volume 47:Issue 1(2021)
• Page Start: 272
• Page End: 283
• Publication Date: 2021-01-01
• Subjects: Suspension plasma spraying -- Thermal barrier coatings -- Microstructure -- Thermal conductivity -- Thermal cyclic fatigue (TCF) -- Thermal shock testing; Ceramics -- Periodicals; Céramique industrielle -- Périodiques; Ceramics; Periodicals; Electronic journals; 666
• DOI: 10.1016/j.ceramint.2020.08.131
• Languages: English
• ISSNs: 0272-8842

Abstract

Abstract: This paper investigates the influence of suspension characteristics on microstructure and performance of suspensions plasma sprayed (SPS) thermal barrier coatings (TBCs). Five suspensions were produced using various suspension characteristics, namely, type of solvent and solid load content, and the resultant suspensions were utilized to deposit five different TBCs under identical processing conditions. The produced TBCs were evaluated for their performance i.e. thermal conductivity, thermal cyclic fatigue (TCF) and thermal shock (TS) lifetime. This experimental study revealed that the differences in the microstructure of SPS TBCs produced using varied suspensions resulted in a wide-ranging overall TBC performance. All TBCs exhibited thermal conductivity lower than 1 W/(m. K) except water-ethanol mixed suspension produced TBC. The TS lifetime was also affected to a large extent where 10 wt % solid loaded ethanol and 25 wt % solid loaded water suspensions produced TBCs exhibited the highest and the lowest lifetime, respectively. On the contrary, TCF lifetime was not as significantly affected as thermal conductivity and TS lifetime, and all ethanol suspensions showed marginally better TCF lifetime than water and ethanol-water mixed suspensions deposited TBCs.