Quantifying CTFE content in FK-800 using ATR-FTIR and time to peak crystallization. Issue 8 (16th November 2020)

• Record Type: Journal Article
• Authors: Kelly, Kristin; Brown, Geoff; Anthony, Spencer
• Is Part Of: International journal of polymer analysis and characterization. Volume 25:Issue 8(2020)
• Page Start: 621
• Page End: 633
• Publication Date: 2020-11-16
• Subjects: CTFE -- VDF -- copolymers -- ATR-FTIR -- heat flow calorimetry; Polymers -- Analysis -- Periodicals; 547.705
• DOI: 10.1080/1023666X.2020.1827859
• Languages: English
• ISSNs: 1023-666X

Abstract

Abstract: The chlorotrifluoroethylene (CTFE) content in vinylidene fluoride (VDF)-CTFE copolymers greatly influences the chemical and physical properties and ultimately determines the application. The copolymer known as FK-800 has a VDF:CTFE ratio of ∼1:3 and is used almost exclusively as the binder in the insensitive high explosive (HE) formulation PBX 9502. Due to the dangerous nature of HE work and the effect CTFE content variations have, the ability to quickly and easily quantify CTFE content is of interest. Two techniques, attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) and time to peak crystallization measured by heat flow calorimetry, were evaluated as potential means for quantifying CTFE content. Based on the certificate of analyses (COAs), FK-800 lots with varied CTFE content encompassing the range historically used in HE applications were used as standards for both methodologies. For FTIR, a linear regression was performed on the peak area of the C-Cl IR stretch and the CTFE content; the methodology was then demonstrated on four samples, two lots of unadulterated material and material recovered from two HE samples. The calculated CTFE content and COAs were in good agreement for all four samples. Heat flow calorimetry revealed the relationship between time to peak crystallization and CTFE content was best fit by a power regression; the methodology was then tested on two different FK-800 lots. Only one sample showed good agreement between the calculated CTFE content and the COA. This discrepancy indicates the method developed is not suitable for quantifying CTFE, but provides valuable insight regarding the crystallization behavior of VDF-CTFE copolymers.