Taper corrosion: a complication of total hip arthroplasty. Issue 11 (November 2020)

• Record Type: Journal Article
• Authors: Morlock, Michael M.; Hube, Robert; Wassilew, Georgi; Prange, Felix; Huber, Gerd; Perka, Carsten
• Is Part Of: EFORT open reviews. Volume 5:Issue 11(2020)
• Page Start: 776
• Page End: 784
• Publication Date: 2020-11
• Subjects: taper -- design -- corrosion -- contamination -- assembly -- loading -- metal; Orthopedics -- Periodicals; Musculoskeletal system -- Periodicals; Musculoskeletal system -- Wounds and injuries -- Periodicals; 616.7
• DOI: 10.1302/2058-5241.5.200013
• Languages: English
• ISSNs: 2058-5241

Abstract

Abstract : The focus on taper corrosion in modular hip arthroplasty increased around 2007 as a result of clinical problems with large-head metal-on-metal (MoM) bearings on standard stems. Corrosion problems with bi-modular primary hip stems focused attention on this issue even more. Factors increasing the risk of taper corrosion were identified in laboratory and retrieval studies: stiffness of the stem neck, taper diameter and design, head diameter, offset, assembly force, head and stem material and loading. The high variability of the occurrence of corrosion in the clinical application highlights its multi-factorial nature, identifying the implantation procedure and patient-related factors as important additional factors for taper corrosion. Discontinuing the use of MoM has reduced the revisions due to metal-related pathologies dramatically from 49.7% (MoM > 32 mm), over 9.2% (MoM ⩽ 32 mm) to 0.8% (excluding all MoM). Further reduction can be achieved by omitting less stiff Ti-alloys and large metal heads (36 mm and above) against polyethylene (PE). Standardized taper assembly of smaller and ceramic heads will reduce the clinical occurrence of taper corrosion even further. If 36 mm heads are clinically indicated, only ceramic heads should be used. Taper-related problems will not comprise a major clinical problem anymore if the mentioned factors are respected. Cite this article: EFORT Open Rev 2020;5:776-784. DOI: 10.1302/2058-5241.5.200013