Fully inkjet-printed multilayered graphene-based flexible electrodes for repeatable electrochemical response. Issue 63 (16th October 2020)

• Record Type: Journal Article
• Authors: Pandhi, Twinkle; Cornwell, Casey; Fujimoto, Kiyo; Barnes, Pete; Cox, Jasmine; Xiong, Hui; Davis, Paul H.; Subbaraman, Harish; Koehne, Jessica E.; Estrada, David
• Is Part Of: RSC advances. Volume 10:Issue 63(2020)
• Page Start: 38205
• Page End: 38219
• Publication Date: 2020-10-16
• Subjects: Chemistry -- Periodicals; 540.5
• DOI: 10.1039/d0ra04786d
• Languages: English
• ISSNs: 2046-2069

Abstract

Abstract : A fully inkjet printed and flexible multilayer graphene based three electrode device showed electrochemical reversibility. Abstract : Graphene has proven to be useful in biosensing applications. However, one of the main hurdles with printed graphene-based electrodes is achieving repeatable electrochemical performance from one printed electrode to another. We have developed a consistent fabrication process to control the sheet resistance of inkjet-printed graphene electrodes, thereby accomplishing repeatable electrochemical performance. Herein, we investigated the electrochemical properties of multilayered graphene (MLG) electrodes fully inkjet-printed (IJP) on flexible Kapton substrates. The electrodes were fabricated by inkjet printing three materials – (1) a conductive silver ink for electrical contact, (2) an insulating dielectric ink, and (3) MLG ink as the sensing material. The selected materials and fabrication methods provided great control over the ink rheology and material deposition, which enabled stable and repeatable electrochemical response: bending tests revealed the electrochemical behavior of these sensors remained consistent over 1000 bend cycles. Due to the abundance of structural defects ( e.g., edge defects) present in the exfoliated graphene platelets, cyclic voltammetry (CV) of the graphene electrodes showed good electron transfer ( k = 1.125 × 10 −2 cm s −1 ) with a detection limit (0.01 mM) for the ferric/ferrocyanide redox couple, [Fe(CN)6 ] −3/−4, which is comparable or superior to modified graphene or graphene oxide-based sensors. Additionally, the potentiometric response of the electrodes displayed good sensitivity over the pH range of 4–10. Moreover, a fully IJP three-electrode device (MLG, platinum, and Ag/AgCl) also showed quasi-reversibility compared to a single IJP MLG electrode device. These findings demonstrate significant promise for scalable fabrication of a flexible, low cost, and fully-IJP wearable sensor system needed for space, military, and commercial biosensing applications.