Effect of iso-octane/methane blend on laminar burning velocity and flame instability. (15th March 2015) - Baloo, Mahdi
Highlights: We did experiments for binary blends of methane/iso-octane and CNG/iso-octane. Addition of methane to iso-octane increases the stretched burning velocity. Blended fuel has higher laminar flame speed than base fuels in some regions. Hydrodynamic instability would be more for 70% methane than the other fuels. Methane has more Markstein length and number than the other blends in rich region. Abstract: CNG–gasoline blended fuel has been considered as a potential choice of alternative fuel for spark ignition (SI) engines specially turbocharged one to utilize advantages of both fuels. In this study methane (main component of CNG) is added in two volumetric fractions of 30% and 70% to iso-octane (representative fuel of gasoline). Spherical flames are experimentally investigated at initial temperature of 363 K and pressure of 1 bar in constant volume chamber. Classical schlieren technique used to characterize the combustion of blended and base fuels. Unstretched flame propagation speed and Markstein lengths are obtained via nonlinear methodology in different equivalence ratio. The laminar burning velocities, Markstein number and burning flux of blended fuel are then extracted and compared with base fuels. The results show that addition of methane to iso-octane increases the unstretched propagation speed in lean region but decrease the unstretched propagation speed in rich region. Blended fuels response to stretch is a linear combination of base fuels in lean region (Ø > 1); but methane has more Markstein length and Markstein number than the other fuels in rich region (Ø > 1). Laminar burning velocity and flame stability of 30% methane blended fuel is close to iso-octane. Laminar burning velocity of 70% methane blended fuel is higher than base fuel at Ø = 0.9. The tests also repeated for CNG/iso-octane blended fuel and similar trend obtained for laminar burning velocities.