A finite element study on the effects of densification on fused silica under indentation. Issue 17 (1st December 2020)

• Record Type: Journal Article
• Authors: Li, Changsheng; Zhang, Liangchi; Sun, Lin; Wu, Chuhan; Duan, Duanzhi; Lin, Qijing; Ding, Jianjun; Jiang, Zhuangde
• Is Part Of: Ceramics international. Volume 46:Issue 17(2020)
• Page Start: 26861
• Page End: 26870
• Publication Date: 2020-12-01
• Subjects: Fused silica -- FEA -- Indentation -- Densification -- Stress field; Ceramics -- Periodicals; Céramique industrielle -- Périodiques; Ceramics; Periodicals; Electronic journals; 666
• DOI: 10.1016/j.ceramint.2020.07.162
• Languages: English
• ISSNs: 0272-8842

Abstract

Abstract: The pressure-induced densification significantly affects the deformation and damage behavior of fused silica. This paper presents a finite element analysis (FEA) of the densification and its effects on the deformation in fused silica under indentation. An elliptical constitutive model was refined to consider the influence of densification on elastic properties and its saturation with hydrostatic pressure. By matching the simulated indentation hardness to experiments, the plastic properties of fused silica were more accurately identified. FEA shows that the modified elliptical model can improve the prediction accuracy of the load-displacement curve of Berkovich indentation. As a widely-used reference material, the heavy densification in fused silica dose not influence the calibration accuracy of the tip area function in the Oliver-Pharr method, which provides a theoretical foundation for the use of fused silica as a reference material. With the modified elliptical model, the FEA successfully predicted the geometry of plastic zone, and the extent of elastic recovery and densification, which provided input parameters for the analytical embedded center of dilation (ECD) model of indentation stress field. Results show that the stress fields under a conical indenter predicted by the FEA agreed well with the ECD model.