Programmable Liquid Adhesion on Bio‐Inspired Re‐Entrant Structures. Issue 35 (15th July 2019) - Liu, Xiaojiang
Abstract: Surfaces combining antispreading and high adhesion can find wide applications in the manipulation of liquid droplets, generation of micropatterns and liquid enrichment. To fabricate such surfaces, almost all the traditional methods demand multi‐step processes and chemical modification. And even so, most of them cannot be applied for some liquids with extremely low surface energy. In the past decade, multiply re‐entrant structures have aroused much attention because of their universal and modification‐independent antiadhesion or antipenetration ability. Unfortunately, theories and applications about their liquid adhesion behavior are still rare. In this work, inspired by the springtail skin and gecko feet in the adhered state, it is demonstrated that programmable liquid adhesion is realized on the 3D‐printed micro doubly re‐entrant arrays. By arranging the arrays reasonably, three different Cassie adhesion behaviors can be obtained: I) no residue adhesion, II) tunable adhesion, and III) absolute adhesion. Furthermore, various arrays are designed to tune macro/micro liquid droplet manipulation, which can find applications in the transportation of liquid droplets, liquid enrichment, generation of tiny droplets, and micropatterns. Abstract : 3D‐printed micro doubly re‐entrant arrays with programmable liquid adhesion are fabricated by mimicking the springtail skin and gecko feet in the adhered state. Various arrays combining low and high adhesion for different liquids are designed to tune macro/micro liquid droplet manipulation, which is favorable in transportation of liquid droplets, liquid enrichment, generation of tiny droplets, and micropatterns.