High-flux thin-film composite polyamide (TFCP) forward osmosis membranes for concentration of simulated cesium- and strontium-bearing effluent solution. Issue 9 (13th June 2019)

• Record Type: Journal Article
• Authors: Ghosh, Bitan; Ghosh, A. K.; Mamtani, V. S.; Bindal, R. C.
• Is Part Of: Separation science and technology. Volume 54:Issue 9(2019)
• Page Start: 1542
• Page End: 1552
• Publication Date: 2019-06-13
• Subjects: Membranes -- radioactive waste treatment -- forward osmosis -- thin-film composite -- polyamide; Separation (Technology) -- Periodicals; 660.284205
• DOI: 10.1080/01496395.2019.1586730
• Languages: English
• ISSNs: 0149-6395

Abstract

ABSTRACT: In this study, we discuss the preparations of thin-film composite polyamide (TFCP) membranes in spiral configuration and their potential for concentration of simulated cesium and strontium-bearing effluent solution (only cesium chloride, strontium chloride and sodium chloride) by forward osmosis (FO). The membranes are prepared by in-situ polymerization technique using m -phenylene diamine (MPD) with phenol and trimesoyl chloride (TMC) system over hydrophilic sulfonated polyethersulfone support followed by heat curing in steam (temperature ~90–100°C). Prepared membranes are characterized in terms of separation performance in FO mode (de-ionized water as feed and 1.0 M NaCl solution as draw solution). When phenol additives are added into water phase, the membrane achieved high water flux of 25.6 L m −2 h −1 with a modest salt flux of 6.43 g m −2 h −1 . A 2512 spiral element was rolled using indigenously developed TFCP-FO membranes and performance was evaluated in terms of volume reduction and back-diffusion of draw solution salts using simulated feed solution (500-ppm NaCl; 1-ppm SrCl2 and CsCl each) with 2(M) solutions of CaCl2 & (NH4 )2 CO3 as draw solution. It was found that the volume reduction of the feed solution is 61–65% after 3 h and back diffusion of cesium and strontium from draw solution to feed are found around 0.022–0.029 ppm.