A new coupled thermomechanical framework for modeling formability in transformation induced plasticity steels. (April 2018)

• Record Type: Journal Article
• Authors: Connolly, Daniel S.; Kohar, Christopher P.; Mishra, Raja K.; Inal, Kaan
• Is Part Of: International journal of plasticity. Volume 103(2018:Apr.)
• Page Start: 39
• Page End: 66
• Publication Date: 2018-04
• Subjects: Phase transformation -- Thermomechanical modeling -- Forming limit diagram -- MK analysis -- TRIP steel; Plasticity -- Periodicals; Plasticité -- Périodiques; Plasticity; Periodicals; 620.11233
• DOI: 10.1016/j.ijplas.2017.12.008
• Languages: English
• ISSNs: 0749-6419

Abstract

Abstract: Transformation induced plasticity (TRIP) steels have significant volume fractions of retained austenite that can undergo a strain induced transformation into martensite. This transformation, known as the TRIP effect, produces a high hardening capacity that can lead to enhanced formability, which can result in weight reduction and improved vehicle fuel efficiency for automakers. In this paper, a phenomenological framework for TRIP steel is integrated into a Marciniak-Kuczynski (MK) model coupled with a thermal solver to create a new fully coupled thermomechanical formulation to evaluate formability. The constitutive model was calibrated to capture the kinematics of martensite and flow stress dependence on strain rate, temperature, triaxiality, and stress asymmetry for TRIP 800 steel. Several sensitivity and exploratory studies are performed to highlight critical mechanisms for modeling TRIP in formability. Kinematic effects of transformation are shown to have a minor effect on formability compared to the hardening and evolving yield surface effects. Thermal effects, such as conduction, convection, and radiation heat transfer, are shown to be crucial for the formability of TRIP 800 at elevated sheet temperatures with room temperature external boundaries, but not for elevated external boundaries. By modifying the sheet initial thermal conditions, martensite transformation could be controlled to be able to delay localization and enhance formability in the plane strain and uniaxial formability by 25% and 35% respectively. Highlights: Introduction of martensite transformation model into Marciniak-Kuczynski framework. A new coupled thermomechanical Marciniak-Kuczynski framework. First coupled thermomechanical simulation of TRIP formability. Effects on formability of martensite transformation mechanisms. Room and elevated temperature formability with thermal boundaries. Formability enhancement of up to 35% for TRIP 800 by delaying martensite formation.