A Comparative Study of the Explosion Characteristics of IPN and IPN/JP‐10 Mixtures in Air Aerosols. Issue 10 (7th September 2017)

• Record Type: Journal Article
• Authors: Liu, Xueling; Wang, Yue
• Is Part Of: Propellants, explosives, pyrotechnics. Volume 42:Issue 10(2017)
• Page Start: 1222
• Page End: 1232
• Publication Date: 2017-09-07
• Subjects: IPN/air and JP-10/air aerosols -- Explosion characteristics -- Lower flammability limit -- Ignition energy -- Various mass ratios of binary mixtures; Propellants -- Periodicals; Explosives -- Periodicals; 662.2
• DOI: 10.1002/prep.201700146
• Languages: English
• ISSNs: 0721-3115

Abstract

Abstract: This article presents a comparison of the explosion characteristics of mixtures of isopropyl nitrate (IPN, (CH3 )2 CHONO2 ) and JP‐10 (C10 H16, tricycle [5.2.1.0 2, 6 ] decane) in air aerosols. The explosion pressure, flame temperature, maximum rate of pressure rise, maximum rate of temperature rise, and lower flammability limits (LFLs) were measured for two sets of IPN and mixed IPN/JP‐10 in air aerosols at different concentrations and Sauter mean diameters (SMDs) of 19 μm and 34 μm, respectively, and the values were compared with the experimental results of JP‐10/air aerosols with SMDs of 20 μm and 35 μm (from our previous research). Experiments were also performed to study various concentrations at various ignition energies for the IPN/air aerosols and the explosions of binary mixture aerosols with various mass ratios of IPN and JP‐10. The experimental results indicated that for the IPN/air and JP‐10/air aerosols with a mean SMD of ∼34 μm, the maximum peak pressure and maximum peak temperature of the IPN/air aerosols were greater than those of the JP‐10/air aerosols. The maximum rate of pressure rise of the IPN/air aerosols reached a maximum value of 395.3 MPa/s at a mean SMD of ∼34 μm, and the pressure increased more abruptly in the IPN/air aerosols than in the JP‐10/air aerosols. The LFLs of the IPN/air aerosols occurred with a total concentration of 197 g/m 3 at a mean SMD of 19 μm and a total concentration of 233 g/m 3 at a mean SMD of 34 μm, whereas the LFLs for the JP‐10/air aerosols with SMDs of 20 μm and 35 μm were less than 47 g/m 3 and 40 g/m 3, respectively. The experimental results presented here also showed that the maximum peak pressure was 1.07 MPa at a binary liquid mass ratio of IPN:JP‐10 (%) of 72 : 28 and a mean SMD of ∼34 μm. Abstract :