Si/SiC coated Cf/SiC composites via tape casting and reaction bonding: The effect of carbon content. Issue 14 (1st November 2016)

• Record Type: Journal Article
• Authors: Song, Shengxing; Yin, Jie; Li, Yinsheng; Zhu, Yunzhou; Huang, Yihua; Cheng, Guofeng; Liu, Xuejian; Huang, Zhengren
• Is Part Of: Ceramics international. Volume 42:Issue 14(2016)
• Page Start: 15811
• Page End: 15817
• Publication Date: 2016-11-01
• Subjects: Si/SiC coatings -- Cf/SiC -- Tape casting -- Reaction bonding; Ceramics -- Periodicals; Céramique industrielle -- Périodiques; Ceramics; Periodicals; Electronic journals; 666
• DOI: 10.1016/j.ceramint.2016.07.048
• Languages: English
• ISSNs: 0272-8842

Abstract

Abstract: In this paper, a novel surface modification method for Cf /SiC composites is proposed. Si/SiC coating on Cf /SiC composites is prepared by tape casting and reaction bonding method. The effects of carbon content on the rheological property of the slurries along with the microstructure of the sintered coatings are investigated. The best result has been obtained by infiltrating liquid silicon into a porous green tape with a carbon density of 0.84 g/cm 3 . In addition, the effect of sintering parameters on the phase composition of the coatings is studied. Dense Si/SiC coating with high density as well as strong bonding onto the substrate is obtained. This Si/SiC coating exhibits an excellent mechanical property with HV hardness of 16.29±0.53 GPa and fracture toughness of 3.01±0.32 MPa m 1/2 . Fine surface with roughness (RMS) as low as 2.164 nm is achieved after precision grinding and polishing. This study inspires a novel and effective surface modification method for Cf /SiC composites.