Characterization and comparison of walnut shells-based activated carbons and their adsorptive properties. Issue 9 (December 2020)

• Record Type: Journal Article
• Authors: Li, Xiya; Qiu, Jieqiong; Hu, Yiqi; Ren, Xiaoyuan; He, Lu; Zhao, Nannan; Ye, Ting; Zhao, Xueqin
• Is Part Of: Adsorption science & technology. Volume 38:Issue 9/10(2020)
• Page Start: 450
• Page End: 463
• Publication Date: 2020-12
• Subjects: Biologically activated carbon -- walnut shell -- adsorption -- Cr(VI) -- methylene blue; Adsorption -- Periodicals; Adsorption; Periodicals; 541.33505
• DOI: 10.1177/0263617420946524
• Languages: English
• ISSNs: 0263-6174

Abstract

The production of low-cost biologically activated carbons (BACs) is urgent need of environmental protection and ecological sustainability. Hence, walnut shells were treated by traditional pyrolysis, direct KOH impregnation and combined activation composed of hydrothermal carbonization and two-step H3 PO4 - and pyrolysis-activation process to obtain porous carbon with high adsorption capacity. It was found that the best adsorption capacity for iodine and organic dye methylene blue (MB) can be obtained using the KOH impregnation at impregnation ratio of 1:1 or combined activation comprising of 2 h H3 PO4 activation and 1 h pyrolysis activation at 1000°C. The produced KOH, H3 PO4 /pyrolysis activated BACs at the optimum conditions are superior to that of commercial ACs, 9.4 and 1.3 times for MB removal, 4 and 4.5 times for iodine number respectively. Characterization results demonstrated their porous structure with very good textural properties such as high BET surface area (1689.1 m 2 /g, 1545.3 m 2 /g) and high total pore volume (0.94 cm 3 /g, 0.96 cm 3 /g). The N2 adsorption-desorption isotherm of H3 PO4 /pyrolysis activated hydrochar suggested the co-existence of micro and meso-pores. Moreover, they are more effective for the removal of Fe(III) and Cr(VI) from aqueous solution than the commercial AC, suggesting a promising application in the field of water treatment.