Toward Automated Additive Manufacturing of Living Bio-Tubes Using Ring-Shaped Building Units. (December 2020)

• Record Type: Journal Article
• Authors: Manning, Kali L.; Feder, Jacob; Kanellias, Marianne; Murphy, John; Morgan, Jeffrey R.
• Is Part Of: SLAS technology. Volume 25:Number 6(2020)
• Page Start: 608
• Page End: 620
• Publication Date: 2020-12
• Subjects: microtissue manipulation -- biofabrication -- additive manufacturing -- automation -- quality control; Medical laboratory technology -- Periodicals; Laboratories -- Equipment and supplies -- Periodicals; Diagnosis, Laboratory -- Periodicals; 616.075
• DOI: 10.1177/2472630320920896
• Languages: English
• ISSNs: 2472-6303

Abstract

Tissue engineering has been largely confined to academic research institutions with limited success in commercial settings. To help address this issue, more work is needed to develop new automated manufacturing processes for tissue-related technologies. In this article, we describe the automation of the funnel-guide, an additive manufacturing method that uses living tissue rings as building units to form bio-tubes. We developed a method based on 96-well plates and a modified off-the-shelf liquid-handling robot to retrieve, perform real-time quality control, and transfer tissue rings to the funnel-guide. Cells seeded into 96-well plates containing specially designed agarose micromolds self-assembled and formed ring-shaped microtissues that could be retrieved using a liquid-handling robot. We characterized the effects of time, cell type, and mold geometry on the morphology of the ring-shaped microtissues to inform optimal use of the building parts. We programmed and modified an off-the-shelf liquid-handling robot to retrieve ring-shaped microtissues from the 96-well plates, and we fabricated a custom illuminated pipette to visualize each ring-shaped microtissue prior to deposit in the funnel guide. Imaging at the liquid-air interface presented challenges that were overcome by controlling lighting conditions and liquid curvature. Based on these images, we incorporated into our workflow a real-time quality control step based on visual inspection and morphological criteria to assess each ring prior to use. We used this system to fabricate bio-tubes of endothelial cells with luminal alignment.