Study on the Static and Dynamic Fracturing Properties of Marble after Being Damaged Dynamically. (4th September 2020)

• Record Type: Journal Article
• Authors: Liu, Yunqiu; Fu, Anqi; Jiang, Binsong; Yu, Liyuan; Wang, Xiaobing
• Other Names: Gong Fengqiang Academic Editor.
• Is Part Of: Advances in civil engineering. Volume 2020(2020)
• Publication Date: 2020-09-04
• Subjects: Civil engineering -- Periodicals; Civil engineering; Periodicals; 624
• DOI: 10.1155/2020/8886198
• Languages: English
• ISSNs: 1687-8086

Abstract

Abstract : A split Hopkinson pressure bar (SHPB) system was first used to perform the cyclic impact loading tests on notched semicircular bend (NSCB) marble specimens. Then, static and dynamic three-point bending tests were conducted on these dynamically damaged specimens, respectively. In the cyclic impact loading tests, the dynamic elastic modulus decreases gradually as the impact number increases, but dynamic cumulative damage exhibits a growing trend. In the static and dynamic three-point bending tests, when dynamic cumulative damage is less than 0.345, the dynamic fracture toughness values are larger than the static fracture toughness values, but the experimental data exhibit the opposite results when dynamic cumulative damage ranges from 0.345 to 0.369. Through the quantitative analysis of fracture surface morphologies, the roughness and area of the fracture surfaces increase with an increasing dynamic cumulative damage. Under the same dynamic cumulative damage of the specimens, both the roughness and area of the surfaces fractured by static three-point bending are larger than those fractured by dynamic three-point bending.