Electrical resistivity of coal-bearing rocks under high temperature and the detection of coal fires using electrical resistance tomography. Issue 2 (31st December 2015)

• Record Type: Journal Article
• Authors: Shao, Zhenlu; Wang, Deming; Wang, Yanming; Zhong, Xiaoxing; Tang, Xiaofei; Xi, Dongdong
• Is Part Of: Geophysical journal international. Volume 204:Issue 2(2016:Feb.)
• Page Start: 1316
• Page End: 1331
• Publication Date: 2015-12-31
• Subjects: Tomography -- Electrical properties -- Geomorphology -- Asia; Geophysics -- Periodicals; 550
• DOI: 10.1093/gji/ggv525
• Languages: English
• ISSNs: 0956-540X

Abstract

Abstract: Coal fires are severe hazards to environment, health and safety throughout the world. Efficient and economical extinguishing of these fires requires that the extent of the subsurface coal fires should be delineated. Electrical and electromagnetic methods have been used to detect coal fires in recent years. However, the resistivity change of coal-bearing rocks at high temperature is rarely investigated. The resistivity characteristics of coal fires at different temperatures and depths are seldomly researched as well. In this paper, we present the results of measurements of several coal-bearing rocks' resistivity and permeability under high temperature. Two major causes for the change in resistivity with increasing temperature are recognized, there are the increase of charge carriers and thermal fracturing, of which the first one is probably the dominant cause. A set of 2-D simulations is carried out to compare the relation of resolution and efficiency of coal fires detection to temperature and depth when adopting the electrical resistance tomography. The simulation results show that the resolution and efficiency decrease with the decrease of temperature and the increase of depth. Finally, the electrical resistance tomography is used to delineate coal fires in the Anjialing Open Pit Mine. Most low-resistivity regions are verified as coal-fire areas according to the long-term monitoring of borehole temperature. The results indicate that the electrical resistance tomography can be used as a tool for the detection of coal fires.