Defect-free TiC/Si multi-layer electrical discharge coatings. (5th October 2018)

• Record Type: Journal Article
• Authors: Murray, J.W.; Cook, R.B.; Senin, N.; Algodi, S.J.; Clare, A.T.
• Is Part Of: Materials & design. Volume 155(2018)
• Page Start: 352
• Page End: 365
• Publication Date: 2018-10-05
• Subjects: Electrical discharge coating -- Nanohardness -- EDM -- Cracking -- Porosity -- TiC; Materials -- Periodicals; Engineering design -- Periodicals; Matériaux -- Périodiques; Conception technique -- Périodiques; Electronic journals; 620.11
• DOI: 10.1016/j.matdes.2018.06.019
• Languages: English
• ISSNs: 0264-1275

Abstract

Abstract: The process of electrical discharge coating (EDC) may be used to deposit hard materials on conformal substrate surfaces. Next generation EDM'd components may exploit attachment phenomena to enhance recast layer properties, to avoid the need for recast layer removal. Here, a ceramic based composite layer was developed without cracking and porosity for the first time, using sequential coating using sacrificial TiC and Si electrodes. Attenuation of the discharge process by gap widening using Si debris in the gap explained improved layer properties. Composite coatings combining WC and TiC were also demonstrated, with good elemental intermixing. Attachment level was correlated strongly with melting point, with high melting point materials resisting ejection due to more rapid solidification. Nanoindentation showed the TiC and WC/TiC layers possessed the highest mean hardness values, approximately double that of the Cu based machined layer which itself yielded a much higher hardness of 11.0 GPa compared to 1.9 GPa of the substrate. Graphical abstract: Unlabelled Image Highlights: A defect free ceramic based coating was made by electrical discharge coating for the first time from sacrificial electrodes. A second coating from Si was used to reduce defects in a TiC layer via gap width enhancement. Material attachment level is correlated with melting point. A TiC coating yielded hardness double that of a Cu based recast layer. Recast layer removal may be avoided by adoption of multi-layer coatings improving mechanical properties.