Enhanced wear resistance of Stellite 12 by Mo addition and LSM. (3rd August 2018)

• Record Type: Journal Article
• Authors: Dilawary, Shaikh Asad Ali; Motallebzadeh, Amir; Akhter, Rehan; Atar, Erdem; Cimenoglu, Huseyin
• Is Part Of: Surface engineering. Volume 34:Number 8(2018)
• Page Start: 569
• Page End: 576
• Publication Date: 2018-08-03
• Subjects: Hardfacing -- Stellite -- molybdenum -- laser surface melting -- wear -- carbides; Surfaces (Technology) -- Periodicals; Coatings -- Periodicals; 620.4405
• DOI: 10.1080/02670844.2017.1393164
• Languages: English
• ISSNs: 0267-0844

Abstract

ABSTRACT: Aiming at additional improvements in the properties of Stellite 12 PTA hardfacing alloy deposited on 4140 steel substrate, the authors have adopted a dual approach. During PTA deposition Stellite 12 hardfacing powder was alloyed with 10 wt-% Mo, followed by laser surface melting (LSM). Addition of 10 wt-% Mo, led to an increase in the volume fraction of Co and W-rich complex carbides. Later on LSM executed on the PTA led to the development of unique microstructure near the surface, characterised by the segregation of hard Cr-rich carbides. The resultant layers were subjected to mechanical characterisation, at room temperature, e.g. hardness and wear resistance. It was concluded that combining both approaches i.e. addition of Mo during the hardfacing process followed by LSM of deposited layer gave additional improvements in mechanical properties owing to evolution of a unique carbide structure.