Hydraulic fracturing to enhance injectivity and storage capacity of CO2 storage reservoirs: Benefits and risks. (September 2020)

• Record Type: Journal Article
• Authors: Huerta, Nicolas J.; Cantrell, Kirk J.; White, Signe K.; Brown, Christopher F.
• Is Part Of: International journal of greenhouse gas control. Volume 100(2020)
• Publication Date: 2020-09
• Subjects: CO2 -- CCUS -- CCS -- Hydraulic fracturing -- Injectivity -- Storage capacity -- STOMP; Greenhouse gases -- Environmental aspects -- Periodicals; Air -- Purification -- Technological innovations -- Periodicals; Gaz à effet de serre -- Périodiques; Gaz à effet de serre -- Réduction -- Périodiques; Air -- Purification -- Technological innovations; Greenhouse gases -- Environmental aspects; Periodicals; 363.73874605
• DOI: 10.1016/j.ijggc.2020.103105
• Languages: English
• ISSNs: 1750-5836

Abstract

Highlights: Underperforming reservoir injectivity is a significant risk to CO2 storage projects, especially at greenfield sites. Hydraulic fracturing along horizontal wells is a well-established technology to improve subsurface flow. Simulations testing the use of hydraulic fracturing at FutureGen 2.0 site show significant improvement in CO2 injectivity. Hydraulic fracturing is an attractive technology to reduce the project risk caused by an underperforming storage reservoir. Abstract: Several potential CO2 storage reservoirs have been found to have insufficient porosity and permeability to support cost effective commercial-scale injection. As a result, the use of hydraulic fracturing to enhance injectivity and storage capacity of CO2 storage reservoirs was explored. Previous modeling studies indicate that fracturing can increase storage capacity by modest to significant amounts (10%–35%), depending on model assumptions. Simulations completed as part of this study confirm that for a range of horizontal well lengths, number of fractures, fracture geometries, and fracture properties, injectivity is improved and capacity increases by 13%–71% over the base case unfractured vertical well. Intuitively, increasing the well length and number of fractures had a corresponding impact on increased capacity. Fracture area (i.e., the fracture height multiplied by its width) was an important parameter for increasing capacity but the specific geometry (e.g., the ratio of height-to-width) was unimportant. The most important aspect that affected capacity was the ability of a fracture to connect high permeability horizontal zones in the reservoir. This would allow a single well to access both layers, thereby maximizing total storage capacity of the reservoir while likely leading to an overall increase of the CO2 footprint, which is an important consideration for Class VI UIC permitting. The results of this work demonstrate that hydraulic fracturing is an attractive option to consider when faced with an underperforming geologic carbon storage site that is at risk of causing a project to fail.