Spatial dynamics of lithiation and lithium plating during high-rate operation of graphite electrodes. Issue 8 (15th July 2020)

• Record Type: Journal Article
• Authors: Finegan, Donal P.; Quinn, Alexander; Wragg, David S.; Colclasure, Andrew M.; Lu, Xuekun; Tan, Chun; Heenan, Thomas M. M.; Jervis, Rhodri; Brett, Dan J. L.; Das, Supratim; Gao, Tao; Cogswell, Daniel A.; Bazant, Martin Z.; Di Michiel, Marco; Checchia, Stefano; Shearing, Paul R.; Smith, Kandler
• Is Part Of: Energy & environmental science. Volume 13:Issue 8(2020)
• Page Start: 2570
• Page End: 2584
• Publication Date: 2020-07-15
• Subjects: Energy conversion -- Periodicals; Fuel switching -- Periodicals; Environmental sciences -- Periodicals; Environmental chemistry -- Periodicals; 333.79
• DOI: 10.1039/d0ee01191f
• Languages: English
• ISSNs: 1754-5692

Abstract

Abstract : Favorable conditions for lithium plating on graphite electrodes occur at high charge rates, causing accelerated degradation and safety concerns. A detailed map of lithiation and lithium plating dyamics is presented. Abstract : The principal inhibitor of fast charging lithium ion cells is the graphite negative electrode, where favorable conditions for lithium plating occur at high charge rates, causing accelerated degradation and safety concerns. The local response of graphite, both at the electrode and particle level, when exposed to fast charging conditions of around 6C is not well understood. Consequently, the conditions that lead to the onset of lithium plating, as well as the local dynamics of lithium plating and stripping, have also remained elusive. Here, we use high-speed (100 Hz) pencil-beam X-ray diffraction to repeatedly raster along the depth of a 101 μm thick graphite electrode in 3 μm steps during fast (up to 6C) charge and discharge conditions. Consecutive depth profiles from separator to current collector were each captured in 0.5 seconds, giving an unprecedented spatial and temporal description of the state of the electrode and graphite's staging dynamics during high rate conditions. The electrode is preferentially activated near the separator, and the non-uniformity increases with rate and is influenced by free-energy barriers between graphite's lithiation stages. The onset of lithium plating and stripping was quantified, occurring only within the first 15 μm from the separator. The presence of lithium plating changed the behavior of the underlying graphite, such as causing co-existence of LiC6 and graphite in the fully discharged state. Finally, the staging behavior of graphite at different rates was quantified, revealing a high dependency on rate and drastic hysteresis between lithiation and delithiation.