On the conversion of CO2 to value added products over composite PdZn and H-ZSM-5 catalysts: excess Zn over Pd, a compromise or a penalty?. Issue 13 (16th June 2020)
- Record Type:
- Journal Article
- Title:
- On the conversion of CO2 to value added products over composite PdZn and H-ZSM-5 catalysts: excess Zn over Pd, a compromise or a penalty?. Issue 13 (16th June 2020)
- Main Title:
- On the conversion of CO2 to value added products over composite PdZn and H-ZSM-5 catalysts: excess Zn over Pd, a compromise or a penalty?
- Authors:
- Ahoba-Sam, Christian
Borfecchia, Elisa
Lazzarini, Andrea
Bugaev, Aram
Isah, Abdulrahman Adamu
Taoufik, Mostafa
Bordiga, Silvia
Olsbye, Unni - Abstract:
- Abstract : Zn was found to possess a dual role in composite PdZn–H-ZSM-5 catalysts for CO2 hydrogenation reactions: it promotes methanol formation when alloyed with Pd, but inhibits hydrocarbon formation by ion exchange with Brønsted acid sites in H-ZSM-5. Abstract : A challenge in converting CO2 into hydrocarbons (HC) via methanol (MeOH) is the gap between the optimal temperature for each step ( i.e. ≤250 °C for MeOH and ≥350 °C for HC). The focus of this study is to elucidate the cause of the limitations associated to oxygenate and hydrocarbon formation in combined PdZn and H-ZSM-5 catalysts at 250 to 350 °C. Starting with two different chemical states of Pd and Zn from two preparation approaches (physical mixture and surface organometallic chemistry grafting), operando X-ray absorption spectroscopy (XAS) and powder X-ray diffraction (PXRD) studies revealed similar PdZn alloy active phase formed during pretreatment in flowing H2 /Inert at 400 °C. The physical mixture performed better than the grafted analogue, with up to 8.8% yield to oxygenates (MeOH and dimethyl ether (DME); MeOH+) at 300 °C, close to the estimated thermodynamic yield (9.0%). The space–time yield (STY) of oxygenates increased from 250 to 300 °C, reaching 8.5 mol(MeOH+) kg(PdZn) −1 h −1 . The catalyst performance surpassed other reported yields in similar systems, which activity declined with temperature even below 300 °C. Operando XAS and PXRD experiments further showed that the PdZn phase active forAbstract : Zn was found to possess a dual role in composite PdZn–H-ZSM-5 catalysts for CO2 hydrogenation reactions: it promotes methanol formation when alloyed with Pd, but inhibits hydrocarbon formation by ion exchange with Brønsted acid sites in H-ZSM-5. Abstract : A challenge in converting CO2 into hydrocarbons (HC) via methanol (MeOH) is the gap between the optimal temperature for each step ( i.e. ≤250 °C for MeOH and ≥350 °C for HC). The focus of this study is to elucidate the cause of the limitations associated to oxygenate and hydrocarbon formation in combined PdZn and H-ZSM-5 catalysts at 250 to 350 °C. Starting with two different chemical states of Pd and Zn from two preparation approaches (physical mixture and surface organometallic chemistry grafting), operando X-ray absorption spectroscopy (XAS) and powder X-ray diffraction (PXRD) studies revealed similar PdZn alloy active phase formed during pretreatment in flowing H2 /Inert at 400 °C. The physical mixture performed better than the grafted analogue, with up to 8.8% yield to oxygenates (MeOH and dimethyl ether (DME); MeOH+) at 300 °C, close to the estimated thermodynamic yield (9.0%). The space–time yield (STY) of oxygenates increased from 250 to 300 °C, reaching 8.5 mol(MeOH+) kg(PdZn) −1 h −1 . The catalyst performance surpassed other reported yields in similar systems, which activity declined with temperature even below 300 °C. Operando XAS and PXRD experiments further showed that the PdZn phase active for MeOH formation was maintained during testing in the 250–350 °C range. InfraRed (FT-IR) and XAS experiments revealed the poisoning of Brønsted acid sites in H-ZSM-5 by Zn(ii ) exchange, thereby rendering it inactive for hydrocarbon formation. Overall, to avoid biasing the hybrid catalyst performance, a careful and balanced choice of the compositional characteristics will be crucial in designing an improved multi-functional catalytic system for CO2 valorisation. … (more)
- Is Part Of:
- Catalysis science & technology. Volume 10:Issue 13(2020)
- Journal:
- Catalysis science & technology
- Issue:
- Volume 10:Issue 13(2020)
- Issue Display:
- Volume 10, Issue 13 (2020)
- Year:
- 2020
- Volume:
- 10
- Issue:
- 13
- Issue Sort Value:
- 2020-0010-0013-0000
- Page Start:
- 4373
- Page End:
- 4385
- Publication Date:
- 2020-06-16
- Subjects:
- Catalysis -- Periodicals
541.395 - Journal URLs:
- http://pubs.rsc.org/en/Journals/JournalIssues/CY ↗
http://www.rsc.org/ ↗ - DOI:
- 10.1039/d0cy00440e ↗
- Languages:
- English
- ISSNs:
- 2044-4753
- Deposit Type:
- Legaldeposit
- View Content:
- Available online (eLD content is only available in our Reading Rooms) ↗
- Physical Locations:
- British Library DSC - 3090.943100
British Library DSC - BLDSS-3PM
British Library STI - ELD Digital store - Ingest File:
- 13830.xml