Effects of surface laminate type and recycled fiber content on properties of three-layer medium density fiberboard. Issue 3 (3rd May 2020)

• Record Type: Journal Article
• Authors: Hong, Min-Kug; Lubis, Muhammad Adly Rahandi; Park, Byung-Dae; Sohn, Chang Hyun; Roh, Jeongkwan
• Is Part Of: Wood material science & engineering. Volume 15:Issue 3(2020)
• Page Start: 163
• Page End: 171
• Publication Date: 2020-05-03
• Subjects: Surface laminate materials -- recycled fiber content -- recycling -- three-layer rMDF -- panel properties; Wood -- Periodicals; Wood products -- Periodicals; Building, Wooden -- Periodicals; 624.184
• DOI: 10.1080/17480272.2018.1528479
• Languages: English
• ISSNs: 1748-0272

Abstract

ABSTRACT: High global production of medium-density fiberboard (MDF) in recent years could generate an equal quantity of waste MDF at the end of its service life, requiring recycling of waste MDF instead of landfilling or incineration. This study investigated effects of the addition of recycled fiber (RF) obtained from surface laminated MDFs with three different materials to the properties of three-layer recycled MDF (rMDF). Three types of surface laminates such as low-pressure laminate, polyethylene terephthalate, and polyester coating were hammer milled, and then went through a patent-pending fiber recovery system to obtain the resultant RFs that were added to the core layer of rMDF. These RFs at three contents (10, 20, and 30%) were blended with 12% of urea-formaldehyde (UF) resin prior to hot-pressing. Statistical analysis showed that the best internal bonding strength, modulus of rupture, and modulus of elasticity of rMDF panels were obtained for LPL-rMDF with a 20% RF content. Thickness swelling, water absorption, and formaldehyde emission of rMDF were reduced by increasing the RF content. These findings suggest that a minimum RF content of 20% can be replaced with virgin fibers for the rMDF manufacture, indicating the feasibility of recycling waste laminated MDF into three-layer rMDF.