Experimental comparison of thermal conditions in office rooms: Diffuse ceiling ventilation, chilled beam system, and chilled ceiling combined with mixing ventilation. (27th May 2020)
- Record Type:
- Journal Article
- Title:
- Experimental comparison of thermal conditions in office rooms: Diffuse ceiling ventilation, chilled beam system, and chilled ceiling combined with mixing ventilation. (27th May 2020)
- Main Title:
- Experimental comparison of thermal conditions in office rooms: Diffuse ceiling ventilation, chilled beam system, and chilled ceiling combined with mixing ventilation
- Authors:
- Lestinen, Sami
Mustakallio, Panu
Kilpeläinen, Simo
Kosonen, Risto
Jokisalo, Juha
Koskela, Hannu
Melikov, Arsen Krikor - Abstract:
- Abstract : Thermal environments generated by diffuse ceiling ventilation (DCV), chilled beam (CB), and chilled ceiling with mixing ventilation (CCMV) systems were compared at different heat loads. Experiments were carried out in two test chambers, in which a double office layout was investigated near heated windows. The heat load strength was increased from a normal level of 37–40 W/floor-m 2 to a peak load level of 57–64 W/floor-m 2 to observe effects on indoor air thermal conditions and draft discomfort. The target indoor air temperature was 26 ± 0.5 °C in the occupied zone. The results show that the air temperature, air speed, and draft rate levels were reasonable at a normal load and increased slightly at peak load conditions. The CCMV system provided the smallest share of locations in which the draft rate level was higher than 10%. None of the studied systems achieved the category A defined by EN ISO 7730. However, all the systems fulfilled the demands of category B, except for CB, which fell to category C at the peak load conditions by exceeding the draft rate limit in one location. Thermal conditions were at a similar level for the studied systems. However, CCMV may reduce slightly the draft discomfort.
- Is Part Of:
- Science and technology for the built environment. Volume 26:Number 5(2020)
- Journal:
- Science and technology for the built environment
- Issue:
- Volume 26:Number 5(2020)
- Issue Display:
- Volume 26, Issue 5 (2020)
- Year:
- 2020
- Volume:
- 26
- Issue:
- 5
- Issue Sort Value:
- 2020-0026-0005-0000
- Page Start:
- 631
- Page End:
- 642
- Publication Date:
- 2020-05-27
- Subjects:
- Heating -- Periodicals
Ventilation -- Periodicals
Air conditioning -- Periodicals
Refrigeration and refrigerating machinery -- Periodicals
Indoor air quality -- Periodicals
Indoor air quality
Air conditioning
Heating
Refrigeration and refrigerating machinery
Ventilation
Periodicals
697 - Journal URLs:
- http://www.tandfonline.com/loi/uhvc21#.VfchsBHBzRY ↗
http://www.tandfonline.com/ ↗ - DOI:
- 10.1080/23744731.2019.1708210 ↗
- Languages:
- English
- ISSNs:
- 2374-474X
- Deposit Type:
- Legaldeposit
- View Content:
- Available online (eLD content is only available in our Reading Rooms) ↗
- Physical Locations:
- British Library DSC - BLDSS-3PM
British Library HMNTS - ELD Digital store - Ingest File:
- 13650.xml