Anaerobic hybrid membrane bioreactor for treatment of synthetic leachate: Impact of organic loading rate and sludge fractions on membrane fouling. (1st May 2020)

• Record Type: Journal Article
• Authors: Burman, Isha; Sinha, Alok
• Is Part Of: Waste management. Volume 108(2020)
• Page Start: 41
• Page End: 50
• Publication Date: 2020-05-01
• Subjects: Anaerobic hybrid membrane bioreactor -- Landfill leachate -- Attached growth -- Membrane fouling -- Ceramic membrane; Hazardous wastes -- Periodicals; Refuse and refuse disposal -- Periodicals; 363.728
• DOI: 10.1016/j.wasman.2020.04.031
• Languages: English
• ISSNs: 0956-053X

Abstract

Highlights: An-HMBR exhibited a COD removal efficiency of 88% for synthetic leachate. Resistance of membrane increased with OLR. Pore clogging followed by cake layer formation were dominant fouling mechanism. EPS was mainly responsible for fouling of ceramic membrane. Abstract: In the present study, the treatment of synthetic landfill leachate was carried out using a lab-scale anaerobic hybrid membrane bioreactor (An-HMBR). The reactor was operated for 250 days at two days of hydraulic retention time (HRT). Average chemical oxygen demand (COD) removal efficiency was ≥ 88% at steady-state conditions at 100% raw leachate. As organic loading rate (OLR) increased from 1.6 to 13.9 Kg COD m −3 d −1, flux gradually declined from 70 to 52 L/m 2 h (LMH) within 250 days. Chemical membrane cleaning enhanced the flux up to 75% of the initial flux at the final stage of the reactor. Reversible fouling (>90%) dominated over irreversible fouling (<8%). Membrane fouling was mainly caused by extracellular polymeric substances (EPS) fraction, which resulted in cake layer formation on the ceramic membrane used in the An-HMBR system. Membrane resistance increased with variables in the following order OLR > MLSS (mixed liquor suspended solids) > EPS > SMP (soluble microbial products). A nonlinear regression model developed for prediction of membrane resistance at different OLR can predict with an error of ±7%.