Microencapsulation of polymeric isocyanate for the modification of urea-formaldehyde resins. (July 2020)

• Record Type: Journal Article
• Authors: Lubis, Muhammad Adly Rahandi; Park, Byung-Dae; Lee, Sang-Min
• Is Part Of: International journal of adhesion & adhesives. Volume 100(2020)
• Publication Date: 2020-07
• Subjects: Microencapsulation -- MpMDI -- Urea-formaldehyde resins -- Plywood -- Adhesion performance -- Formaldehyde emission; Adhesion -- Periodicals; Adhesives -- Periodicals; Adhésion (Physique) -- Périodiques; Adhésifs -- Périodiques; Adhesie; Kleefstoffen; Adhesion; Adhesives; Periodicals; 668.3
• DOI: 10.1016/j.ijadhadh.2020.102599
• Languages: English
• ISSNs: 0143-7496

Abstract

Abstract: This study was conducted to prepare the microcapsules of polymeric 4-4 diphenyl methane diisocyanate (MpMDI) by interfacial polymerization using two different surfactants (Tween 40 and Gum Arabic) for the modification of urea-formaldehyde (UF) resins. MpMDI obtained by Tween 40 (TW-MpMDI) were spherical, smooth, and small diameter, while those prepared by Gum Arabic (GA-MpMDI) were irregular, rough surface, and larger diameter. Attenuated total reflection–Fourier transform infrared (ATR-FTIR) spectra of two types of MpMDIs confirmed the successful microencapsulation of pMDI by detecting the isocyanate (NCO) groups after rupturing the shell of MpMDIs. As the MpMDI content in UF resins increased, the non-volatile solids content, pH, gelation time, viscosity, and exothermic peak temperature of UF/MpMDI adhesives slightly increased. Plywood bonded with UF/MpMDI adhesives had 15% higher tensile shear strength (TSS) and 30% higher modulus of rupture (MOR) than those of the plywood bonded with neat UF resins owing to the formation of urethane (HN-(CO)–O-R) bonds. In particular, plywood bonded with UF/TW-MpMDI had higher TSS and MOR values than those bonded with UF/GA-MpMDI adhesive. Regardless of the surfactant types, the formaldehyde emission decreased about 54% with 5% MpMDI addition into UF resins. These results and statistical analysis revealed that 1% TW-MpMDI addition into UF resins provided a proper balance between good adhesion and low formaldehyde emission for plywood.