Assessment of the attenuation of metal-infused filaments for 3D printing a gamma camera calibration phantom. (June 2020)

• Record Type: Journal Article
• Authors: Beckmann, Jacob; Popovic, Kosta
• Is Part Of: Medical engineering & physics. Volume 80(2020)
• Page Start: 60
• Page End: 64
• Publication Date: 2020-06
• Subjects: 3D printing -- Attenuation -- Imaging phantoms -- Gamma imaging; Biomedical engineering -- Periodicals; Biomedical Engineering -- Periodicals; Physics -- Periodicals; Génie biomédical -- Périodiques; Biomedical engineering; Electronic journals; Periodicals; 610.28
• DOI: 10.1016/j.medengphy.2020.04.003
• Languages: English
• ISSNs: 1350-4533

Abstract

Highlights: Attenuation of 3 commercial metal-infused 3D printing filaments found at Co-57 energy Clinical QC imaging phantom for gamma camera spatial resolution designed, 3D printed Imaging phantoms 3D printed with metal-infused filaments a testbed for novel imagers Abstract: The capability to produce customizable 3D printed imaging phantoms out of a growing number of materials has contributed to the increased use of such phantoms in clinical practice and research. Many of these materials have not been characterized at clinically relevant parameters for nuclear medicine imaging. In this work, we measured the attenuation of several 3D printing metal-infused filament materials with the potential for blocking 122 keV gamma photons using a scintillation detector. Understanding the ability of each material to attenuate gamma rays would allow modelling of varying levels of attenuation required for different body tissues at this energy. In addition, it allows for the determination of the thickness of the material needed to attenuate 122 keV photons, in order to build high-contrast spatial resolution phantoms. To achieve this goal, we performed attenuation experiments for three different 3D printing materials in this work (Tungsten infused Acrylonitrile Butadiene Styrene (ABS), Iron infused Polylactic Acid (PLA), and Stainless Steel (SS) infused PLA), by observing gamma transmission through blocks made of each material as a function of thickness. A Cobalt-57 (Co-57; 122 keV) source was chosen because of its relevance to nuclear medicine. Tungsten infused ABS showed the highest measured attenuation coefficient out of the three candidates at this energy (1.452 cm 2 /g). We further designed and 3D printed an imaging phantom to aid in characterizing the spatial resolution of novel gamma imaging systems at the above energy. The phantom design contains multiple line pairs (lp) located in four quadrants ranging from 1.2 mm – 8 mm. The 3D printed phantom was imaged by a molecular breast tomosynthesis (MBT) gamma camera. Assessment of the intrinsic spatial resolution of the MBT camera showed that our 3D printed phantom might be a viable option for routine spatial resolution quality control (QC) of gamma cameras used in clinical practice.