A novel Bayesian optimization for flow condensation enhancement using nanorefrigerant: A combined analytical and experimental study. (6th April 2020)

• Record Type: Journal Article
• Authors: Rezaeianjouybari, Behnoush; Sheikholeslami, M.; Shafee, Ahmad; Babazadeh, Houman
• Is Part Of: Chemical engineering science. Volume 215(2020)
• Publication Date: 2020-04-06
• Subjects: Two Stage-Bayesian optimization (TS-BO) -- Refrigerant -- Condensation -- Heat transfer -- Nanoparticle; Chemical engineering -- Periodicals; Génie chimique -- Périodiques; Chemical engineering; Periodicals; Electronic journals; 660
• DOI: 10.1016/j.ces.2019.115465
• Languages: English
• ISSNs: 0009-2509

Abstract

Highlights: The condensing heat transfer of a nanorefrigerant flow is investigated experimentally. The Bayesian Optimization approach is used for the heat transfer optimization. Adding nanoparticles to the pure refrigerant increases the heat transfer. The nanorefrigerant with [1.5% −2.2%] nano percentage has maximum heat transfer. Abstract: According to the recent researches, adding nanomaterial within the pure refrigerant can substantially enhance the heat transfer rate in phase change (boiling/condensing) flows. Therefore, for a given operating conditions, it is unclear whether the heat transfer is optimized at a certain mass fraction of nanoparticles. In the present study, an integrated analytical, and experimental approach was scrutinized to find the heat transfer optimization of flow condensation using nanorefrigerant. For the experiment, CuO nanoparticles were disperesed with varying mass fractions (0.5–3.5%) in the baseline refrigerant/oil (R600a/POE) to produce Nanorefrigerants (R600a/POE/CuO). The optimum nanomaterial concentration for maximum perfromance has been desiganted by a novel optimization method called two stage-Bayesian optimization (TS-BO), which replaces the expensive experimental process by a cheap surrogate model constructed by Kriging. It was proved that the optimum nanoparticle fraction is significantly depend on the mass velocity and vapor quality while at a fixed vapor quality, the optimum nanoparticle concentration increased with decreasing mass flux. The highest heat transfer enhancement was achieved by nanparticle concentrations of 1.5–2.2%.