Sputtered and selenized Sb2Se3 thin-film solar cells with open-circuit voltage exceeding 500 mV. (July 2020)

• Record Type: Journal Article
• Authors: Liang, Guang-Xing; Luo, Yan-Di; Chen, Shuo; Tang, Rong; Zheng, Zhuang-Hao; Li, Xue-Jin; Liu, Xin-Sheng; Liu, Yi-Ke; Li, Ying-Fen; Chen, Xing-Ye; Su, Zheng-Hua; Zhang, Xiang-Hua; Ma, Hong-Li; Fan, Ping
• Is Part Of: Nano energy. Volume 73(2020)
• Publication Date: 2020-07
• Subjects: Sb2Se3 solar Cell -- Open-circuit voltage -- Sputtering -- Selenization -- Elemental inter-diffusion; Nanoscience -- Periodicals; Nanotechnology -- Periodicals; Nanostructured materials -- Periodicals; Power resources -- Technological innovations -- Periodicals; Nanoscience; Nanostructured materials; Nanotechnology; Power resources -- Technological innovations; Periodicals; 621.042
• DOI: 10.1016/j.nanoen.2020.104806
• Languages: English
• ISSNs: 2211-2855

Abstract

Abstract: Antimony selenide (Sb2 Se3 ) is a potential absorber material for environment-friendly and cost-efficient photovoltaics and has achieved considerable progress in recent years. However, the severe open-circuit voltage ( V oc ) deficit ascribed to the interface and/or bulk defect states has become the main obstacle for further efficiency improvement. In this work, Sb2 Se3 absorber layer was prepared by an effective combination reaction involving sputtered and selenized Sb precursor thin films. The self-assembled growth of Sb2 Se3 thin films with large crystal grains, benign preferential orientation, and accurate chemical composition were successfully fulfilled under an appropriate thickness of Sb precursor and an optimized selenization scenario. Substrate structured Sb2 Se3 thin-film solar cells, a champion device with a power-conversion efficiency of 6.84%, were fabricated. This device is comparable to state-of-the-art ones and represents the highest efficiency of sputtered Sb2 Se3 solar cells. Importantly, the high V oc of 504 mV is closely related to the reduced deep level defect density for the Sb2 Se3 absorber layer, the passivated interfacial defects for Sb2 Se3 /CdS heterojunction interface, and the additional heterojunction heat treatment-induced Cd and S inter-diffusion. This significantly improved V oc demonstrates remarkable potential to broaden its scope of applications for Sb2 Se3 solar cells. Graphical abstract: Image 1 Highlights: An effective combination reaction of sputtered and selenized Sb precursors for Sb2 Se3 thin film solar cells. The self-assembled growth of Sb2 Se3 thin films with large crystal grains, benign preferential orientation and accurate chemical composition. A highly interesting V oc record of 504 mV obtained due to the reduced deep level defect density, the passivated interfacial defects and heterojunction heat treatment-induced Cd and S inter-diffusion. PCE of 6.84% represents the highest efficiency of sputtered Sb2 Se3 solar cells.