Quantification of hydrogen trapping in multiphase steels: Part I – Point traps in martensite. (1st August 2020)
- Record Type:
- Journal Article
- Title:
- Quantification of hydrogen trapping in multiphase steels: Part I – Point traps in martensite. (1st August 2020)
- Main Title:
- Quantification of hydrogen trapping in multiphase steels: Part I – Point traps in martensite
- Authors:
- Turk, Andrej
Joshi, Gaurav R.
Gintalas, Marius
Callisti, Mauro
Rivera-Díaz-del-Castillo, Pedro E.J.
Galindo-Nava, Enrique I. - Abstract:
- Graphical abstract: Abstract: We quantified systematically the H trap density in martensite resulting from the presence of dislocations, grain boundaries and retained austenite through a combination of detailed microstructural characterisation, H permeation, thermal desorption and diffusion modelling. This thorough analysis allowed for the first time to deconvolve key microstructural constituents affecting H diffusion in multi-trap martensite. Three microstructures were investigated – as-quenched, tempered at 300 °C and tempered at 450 °C. The first two microstructures had identical dislocation densities and grain size, while the as-quenched one also contained 3.5 vol.% of retained austenite. The two tempered microstructures showed a large difference in dislocation density with few other microstructural differences. The as-quenched microstructure exhibited over an order of magnitude lower H diffusivity and increased H trapping due to retained austenite, while the tempered samples exhibited very similar diffusivities, indicating that dislocations have a limited effect on H trapping. Trap density scaling laws were successfully identified and validated through diffusion simulations and experiments. It was also shown that in martensite and heavily deformed ferrite, where the average grain size is small, grain boundaries are more effective trapping sites than dislocations. Our results also show that retained austenite cannot be effectively modelled as a point trap under the localGraphical abstract: Abstract: We quantified systematically the H trap density in martensite resulting from the presence of dislocations, grain boundaries and retained austenite through a combination of detailed microstructural characterisation, H permeation, thermal desorption and diffusion modelling. This thorough analysis allowed for the first time to deconvolve key microstructural constituents affecting H diffusion in multi-trap martensite. Three microstructures were investigated – as-quenched, tempered at 300 °C and tempered at 450 °C. The first two microstructures had identical dislocation densities and grain size, while the as-quenched one also contained 3.5 vol.% of retained austenite. The two tempered microstructures showed a large difference in dislocation density with few other microstructural differences. The as-quenched microstructure exhibited over an order of magnitude lower H diffusivity and increased H trapping due to retained austenite, while the tempered samples exhibited very similar diffusivities, indicating that dislocations have a limited effect on H trapping. Trap density scaling laws were successfully identified and validated through diffusion simulations and experiments. It was also shown that in martensite and heavily deformed ferrite, where the average grain size is small, grain boundaries are more effective trapping sites than dislocations. Our results also show that retained austenite cannot be effectively modelled as a point trap under the local equilibrium assumption, which is frequently used to model its effect on H diffusion, and that bulk trapping must be considered at least in two dimensions, which is addressed in part II of this series. … (more)
- Is Part Of:
- Acta materialia. Volume 194(2020)
- Journal:
- Acta materialia
- Issue:
- Volume 194(2020)
- Issue Display:
- Volume 194, Issue 2020 (2020)
- Year:
- 2020
- Volume:
- 194
- Issue:
- 2020
- Issue Sort Value:
- 2020-0194-2020-0000
- Page Start:
- 118
- Page End:
- 133
- Publication Date:
- 2020-08-01
- Subjects:
- Hydrogen diffusion -- Austenite -- Dislocation density -- Grain boundaries -- Thermal desorption analysis (TDA)
Materials -- Periodicals
Materials science -- Periodicals
Materials -- Mechanical properties -- Periodicals
Metallurgy -- Periodicals
Chemistry, Inorganic -- Periodicals
620.112 - Journal URLs:
- http://www.sciencedirect.com/science/journal/13596454 ↗
http://www.elsevier.com/journals ↗ - DOI:
- 10.1016/j.actamat.2020.05.007 ↗
- Languages:
- English
- ISSNs:
- 1359-6454
- Deposit Type:
- Legaldeposit
- View Content:
- Available online (eLD content is only available in our Reading Rooms) ↗
- Physical Locations:
- British Library DSC - 0629.920000
British Library DSC - BLDSS-3PM
British Library HMNTS - ELD Digital store - Ingest File:
- 13419.xml