Fired clay-based construction and demolition waste as pozzolanic addition in cements. Design of new eco-efficient cements. (20th August 2020) - Asensio, Eloy
Abstract: Industrial waste and by-products are being widely used by the cement industry to enhance process efficiency and sustainability, in keeping with EU circular economy guidelines. This study assessed the properties of newly designed cements bearing fired clay-based C&DW against European standards. The findings showed that the blended cements met all the chemical, physical and mechanical requirements presently in place. They were also observed to qualify as type II and type IV cements, inasmuch as they contained waste that reacted with the calcium hydroxide released during cement hydration to generate the respective products. In addition, the inclusion of 10% or 20% C&DW yielded cements that could be classified as European standard strength classes 42.5 and 52.5. With a 30% C&DW, the resulting binder was a low heat of hydration cement. The present research confirmed the pozzolanic behaviour of waste in cement/C&DW systems, attested to by the reduction in both pore size and portlandite content. The new hydration products forming as a result of the pozzolanic reaction enhanced the flexibility and plasticity of the mortars prepared with the new cements relative to the mortars bearing unadditioned cement. Patent ES2512065 was awarded on the grounds of the results of this study. Highlights: The possibility of incorporation of C&DW as pozzolanic addition. Pozzolanic behaviour of waste in cement/C&DW systems attested to by the reduction in both pore size and portlandite content . Cements with fired clay-based C&DW complies with the Standards from the chemical, physical and mechanical point of view. The new hydration products due to the pozzolanic reaction enhanced the flexibility and plasticity of mortars based on C&DW.