Constructal thermodynamic optimization for ocean thermal energy conversion system with dual-pressure organic Rankine cycle. (15th April 2020)

• Record Type: Journal Article
• Authors: Wu, Zhixiang; Feng, Huijun; Chen, Lingen; Tang, Wei; Shi, Junchao; Ge, Yanlin
• Is Part Of: Energy conversion and management. Volume 210(2020)
• Publication Date: 2020-04-15
• Subjects: Ocean thermal energy conversion system -- Dual-pressure organic Rankine cycle -- Net power output -- Constructal theory -- Finite time thermodynamics -- Generalized thermodynamic optimization; Direct energy conversion -- Periodicals; Energy storage -- Periodicals; Energy transfer -- Periodicals; Énergie -- Conversion directe -- Périodiques; Direct energy conversion; Periodicals; 621.3105
• DOI: 10.1016/j.enconman.2020.112727
• Languages: English
• ISSNs: 0196-8904

Abstract

Highlights: A constructal thermodynamic optimization model for OTEC system is established. OTEC system includes a dual-pressure organic Rankine cycle. Combination of constructal theory with finite time thermodynamics is applied. Net power output of OTEC system is chosen as the optimization objective. Net power output after optimization is improved by 14.95%. Abstract: A constructal thermodynamic optimization model for ocean thermal energy conversion system (OTECS) with a dual-pressure organic Rankine cycle (DPORC) to make better use of the ocean thermal energy is established in this paper. It is performed by combing constructal theory with finite time thermodynamics. Optimal design of the OTECS is conducted under the conditions of the fixed total heat transfer area of the heat exchangers and the total volume of the dual-pressure turbines. The net power output of the OTECS is chosen as the optimization objective, and six parameters, that is, the heat transfer plate effective lengths of the high-temperature evaporator, low-temperature evaporator, and condenser, volume fraction of the high-pressure turbine as well as heat transfer area fractions of the condenser and high-temperature evaporator, are employed as the optimization variables. The optimal performance and optimal construct of the OTECS are obtained. The influences of total mass flow rate and mass flow rate ratio of the working fluid, inlet temperatures of the warm and cold seawaters, and wheel diameter ratio of the turbine on the optimization results are analyzed. Moreover, the optimal performances of the OTECS with the DPORC and single-pressure organic Rankine cycle (SPORC) are compared. The results show that the net power outputs after the primary, twice, triple, and sextuple constructal thermodynamic optimizations are improved by 2.80%, 4.66%, 9.95%, and 14.95%, respectively, compared with the initial net power output. The net power output can be further improved by increasing the total mass flow rate of the working fluid, warm-seawater inlet temperature, and wheel diameter ratio of the turbine in reasonable ranges. Compared with the SPORC, the DPORC has advantages in both the net power output and net thermal efficiency. The obtained results can provide theoretical guidelines for the optimal designs of the OTECS.