Loading‐rate dependence of mode I crack growth in concrete. Issue 5 (2nd December 2019)

• Record Type: Journal Article
• Authors: Ma, Minhua; Wu, Zhimin; Hu, Xiaozhi; Yu, Rena C.; Fei, Xiaodong
• Is Part Of: Fatigue & fracture of engineering materials & structures. Volume 43:Issue 5(2020)
• Page Start: 978
• Page End: 990
• Publication Date: 2019-12-02
• Subjects: crack growth process -- crack propagation criterion of concrete -- loading‐rate dependence -- rate‐dependent cohesive law; Materials -- Fatigue -- Periodicals; Fracture mechanics -- Periodicals; 620.1123
• DOI: 10.1111/ffe.13174
• Languages: English
• ISSNs: 8756-758X

Abstract

Abstract: Mode I crack propagation process of concrete under relatively low loading rates which cover four orders of magnitude (0.2 μm/s to 2.0 mm/s) is investigated with three‐point bending (TPB) beams. All measured material properties exhibit rate sensitivity and follow a log‐linear relationship with the loading rate. A rate‐sensitive softening curve is established. The complete load‐crack mouth opening displacement ( P‐CMOD ) curve, crack propagation length, and fracture process zone (FPZ) length are simulated based on crack growth criterion with the fitted material parameters under those loading rates. Results show that the simulated P‐CMOD curves agree well with those of experimental measurements. It is clear that the peak load increases with the loading rate and so is the critical crack mouth opening displacement. Moreover, under the same load level, the length of the FPZ and the cohesive stress at the initial crack tip also increase with the increasing loading rate.