Influence of tip leakage flow and inlet distortion flow on a mixed-flow pump with different tip clearances within the stall condition. (June 2020)

• Record Type: Journal Article
• Authors: Ji, Leilei; Li, Wei; Shi, Weidong
• Is Part Of: Proceedings of the Institution of Mechanical Engineers. Volume 234:Number 4(2020)
• Page Start: 433
• Page End: 453
• Publication Date: 2020-06
• Subjects: Mixed-flow pump -- rotating stall -- tip leakage flow -- tip leakage vortex -- unsteady flow -- flow separation; Mechanical engineering -- Periodicals; Power (Mechanics) -- Periodicals; Production engineering -- Periodicals; 621
• DOI: 10.1177/0957650919863622
• Languages: English
• ISSNs: 0957-6509

Abstract

In order to investigate the effect of impeller tip clearance on internal flow fields and the rotating stall inception impacted by tip leakage vortex and inlet unsteady flow in a mixed-flow pump, mixed-flow pump models with tip clearances of 0.5 mm, 0.8 mm, and 1.1 mm were numerically calculated, and then the energy performance curves and internal flow structures were obtained and compared. The results show that the pump efficiency and the internal flow fields of numerical calculation are in good agreement with experimental results at design flow rate and near-stall condition. A portion of the positive slope segment appears in the energy performance curves under different tip clearances. The lowest head of the mixed-flow pump in the positive slope region decreases with the increase of the tip clearance while the highest head shows an opposite situation indicating that mixed-flow pumps are easier to stall under small tip clearance. At the design flow rate condition, the tip leakage vortex is relatively stable under different tip clearances and appears as a "snail shell" shape, whereas in rotating stall conditions, the "snail shell" shape disappear and the tip leakage flow on blade front forms a "flat" vortex structure. The inlet swirl flow not only affects the tip leakage flow in rotating stall conditions under different tip clearances, but also blocks the fluid from the inlet pipe. Under the circumstance of the same tip clearance, the main frequency amplitude of pressure pulsation coefficient gradually shifts away from blade passing frequency (96.67 Hz) to the axial frequency (24.17 Hz) when the pump operates in the stall condition.