Numerical simulation and optimization of casting process of copper alloy water-meter shell. (May 2020)

• Record Type: Journal Article
• Authors: Zheng, Kaikui; Lin, Youxi; Chen, Weiping; Liu, Lei
• Is Part Of: Advances in mechanical engineering. Volume 12:Number 5(2020)
• Publication Date: 2020-05
• Subjects: Copper alloy -- water-meter shell -- casting process optimization -- shrinkage defect -- finite element analysis; Mechanical engineering -- Periodicals; 621.05
• DOI: 10.1177/1687814020923450
• Languages: English
• ISSNs: 1687-8132

Abstract

The water-meter shell has a complex-structured thin-walled cavity, and it can cause casting defects such as shrinkage and misrun. On the basis of structural analysis of a water-meter shell, a three-dimensional model and a finite element model of the water-meter shell were constructed using the SOLIDWORKS and ProCAST software as a modeling tool and a casting numerical simulation tool, respectively. Three processes associated with the bottom gating system without a riser, a step gating system with a preliminary riser, and a step gating system with an optimum riser were successively numerically simulated. The mold-filling sequence, temperature distribution, liquid-phase distribution during solidification, and shrinkage distribution of these three processes are discussed here. The numerical simulation results indicated that optimization of the casting process and the rational assembling of the riser led to the shrinkage volumes at the inlet position, regulating sleeve, and sealing ring of the water-meter shell decreasing from 0.68 to 0 cm 3, 1.39 to 0.22 cm 3, and 1.32 to 0.23 cm 3, respectively. A comparison between model predictions and experimental measurements indicated that the castings produced by the optimized process had good surface quality and beautiful appearance, without casting defects, demonstrating that numerical simulation can be used as an effective tool for improving casting quality.