Degradation phenomena occurring in the conical taper of a short-term retrieved ZTA femoral head: A case study. (5th November 2018)

• Record Type: Journal Article
• Authors: Rondinella, A.; Marin, E.; Boschetto, F.; Zanocco, M.; Zhu, W.; Affatato, S.; Yamamoto, K.; Tateiwa, T.; Pezzotti, G.
• Is Part Of: Materials & design. Volume 157(2018)
• Page Start: 362
• Page End: 370
• Publication Date: 2018-11-05
• Subjects: Zirconia-toughened alumina -- Confocal Raman spectroscopy -- Phase transformation -- Metal contamination -- 3D-CAD; Materials -- Periodicals; Engineering design -- Periodicals; Matériaux -- Périodiques; Conception technique -- Périodiques; Electronic journals; 620.11
• DOI: 10.1016/j.matdes.2018.07.056
• Languages: English
• ISSNs: 0264-1275

Abstract

Abstract: Despite being the most used ceramic biomaterial in hip joint prosthesis, Zirconia Toughened Alumina (ZTA) is liable to undergo several degradation mechanisms in vivo, which might drastically affect its structural performance over time. Our standing point in this investigation was that neither in vitro tests nor finite elements simulations are yet capable to fully reproduce the complexity of the in vivo conditions. Through accurate analyses of retrievals, we attempt to add more pieces to the puzzle of in vivo loading history and to obtain better insight into the ZTA degradation mechanisms. For doing so, we applied a previously established automated scanning protocol to investigate the coupling between a ZTA femoral head and its metal stem counterpart in a short-term (20 months) retrieved hip implant. Metal contamination on the ZTA surface was severe and polymorphic transformation widespread on the whole surface of the taper, though reaching different values depending on the specific zone of the taper. Clear signs of third body abrasive wear and fatigue crack initiation could be found by means of laser and electron microscopies, and X-ray spectroscopy. Highly resolved mapping by Raman micro-spectroscopy revealed very high monoclinic fractions and pronounced residual stress magnitudes despite the relatively short in - vivo lifetime. Graphical abstract: Unlabelled Image Highlights: We studied the degradation phenomena at the ceramic-taper/metallic-stem interface in a 20 months retrieved ZTA femoral head; Several micro-cracks were spread all over the ceramic taper surface with lengths varying from few μm to 1 mm; Metal staining was present as evenly distributed stripes on the crests of the mechanically machined pristine surface; Significant phase instability was found, with monoclinic volume fraction values reaching up to 50%; Early monoclinic transformation caused grain pullout, leading to extensive third body wear phenomena on the taper surface.