Enhancing the cycle stability of Li–O2 batteries via functionalized carbon nanotube-based electrodes. Issue 8 (22nd January 2020)

• Record Type: Journal Article
• Authors: Cho, Young Shik; Kim, Hyunjin; Byeon, Minhoo; Kim, Dong Young; Park, Hyeokjun; Jung, Yeonsu; Bae, Youngjun; Kim, Mokwon; Lee, DongJoon; Park, JungOck; Kang, Kisuk; Im, Dongmin; Park, Chong Rae
• Is Part Of: Journal of materials chemistry. Volume 8:Issue 8(2020)
• Page Start: 4263
• Page End: 4273
• Publication Date: 2020-01-22
• Subjects: Materials -- Research -- Periodicals; Chemistry, Analytic -- Periodicals; Environmental sciences -- Research -- Periodicals; 543.0284
• DOI: 10.1039/c9ta12116a
• Languages: English
• ISSNs: 2050-7488

Abstract

Abstract : 3, 5-Bis(trifluoromethyl)phenylmaleimide functionalized CNT buckypapers are prepared as a binder-free oxygen electrode for Li–O2 batteries with increased capacity and enhanced stability. Abstract : Achieving the high theoretical energy density (∼3500 W h kg −1 ) of Li–O2 batteries involves maximizing the electrochemically active surface area (EASA) of the electrodes. Carbon nanotubes (CNTs) have been widely adopted for Li–O2 electrodes but their EASA is limited by their electrolyte-phobic surface nature and the strong van der Waals interaction between CNTs. To increase the affinity between CNT-based electrodes and the electrolyte without decreasing CNT chemical stability, CNT buckypapers are functionalized with 3, 5-bis(trifluoromethyl)phenylmaleimide. The solubility parameters of the electrolyte and CNTs are considered so that the maleimide groups increase the affinity between the electrode and electrolyte and the 3, 5-bis(trifluoromethyl)phenyl groups protect the maleimide groups from decomposition. The functionalized CNT cathode exhibits a 58% greater discharge capacity and a 50% increased cyclability compared to the pristine CNT cathode when a 1 : 2.5 weight ratio of CNT to electrolyte was used due to an increased EASA and steric hindrance effect. Finally, a 3D folded Li–O2 cell is fabricated using the functionalized CNT-based cathode and demonstrated 30 cycles at 100 W h kgcell −1 cutoff. These results clearly show that high energy density and long cycling performance of Li–O2 batteries can be achieved even with a much reduced amount of electrolyte by increasing the affinity between CNT-based electrodes and the electrolyte.