Investigation of the properties of alkali-activated slag mixes involving the use of nanoclay and nucleation seeds for 3D printing. (1st April 2020)

• Record Type: Journal Article
• Authors: Panda, Biranchi; Ruan, Shaoqin; Unluer, Cise; Tan, Ming Jen
• Is Part Of: Composites. Number 186(2020)
• Publication Date: 2020-04-01
• Subjects: Alkali-activated slag -- 3D printing -- Seeding -- Rheology; Composite materials -- Periodicals; Materials science -- Periodicals; Composite materials; Periodicals; Electronic journals; 620.118
• DOI: 10.1016/j.compositesb.2020.107826
• Languages: English
• ISSNs: 1359-8368

Abstract

Abstract: This study investigated the properties of alkali activated slag (AAS) binders formulated for extrusion‐based 3D printing. The fresh properties of AAS mixes were tailored through the use of nanoclay (NC) and nucleation seeds. The printability criteria employed were the ease of extrusion (extrudability) and the stability of the layered structure (buildability). Introduction of 0.4% NC in AAS mixes led to improved thixotropic properties due to the flocculation effect, which accounted for the extrudability and shape fidelity of the binder. Inclusion of 2% hydromagnesite seeds in this mix design provided additional nucleation sites for the increased precipitation of hydrate phases, resulting in denser microstructures. This enhanced the hydration reaction and improved the structural build-up rate necessary for large-scale 3D printing. The developed AAS mix containing 0.4% NC and 2% hydromagnesite seeds was used in the printing of an actual 3D structure to demonstrate its feasibility to be used in 3D printing applications.