Engineering squandered cotton into eco-benign microarchitectured triboelectric films for sustainable and highly efficient mechanical energy harvesting. (July 2019)

• Record Type: Journal Article
• Authors: Graham, Sontyana Adonijah; Dudem, Bhaskar; Mule, Anki Reddy; Patnam, Harishkumarreddy; Yu, Jae Su
• Is Part Of: Nano energy. Volume 61(2019)
• Page Start: 505
• Page End: 516
• Publication Date: 2019-07
• Subjects: Coin-cell type triboelectric nanogenerators -- Squandered cotton -- PVA loaded cellulose films -- Microarchitectures -- Kapton -- Self-powering systems; Nanoscience -- Periodicals; Nanotechnology -- Periodicals; Nanostructured materials -- Periodicals; Power resources -- Technological innovations -- Periodicals; Nanoscience; Nanostructured materials; Nanotechnology; Power resources -- Technological innovations; Periodicals; 621.042
• DOI: 10.1016/j.nanoen.2019.04.081
• Languages: English
• ISSNs: 2211-2855

Abstract

Abstract: Harvesting mechanical energy from daily life human activities has gained tremendous interest, along with the concept of waste to wealth which has been also a major concern from a few decades. In this regards, firstly, we fabricated microcrystalline cellulose (MCC) particles from the squandered cotton and they were further dissolved into biocompatible polyvinyl alcohol (PVA) to develop a triboelectric material. The resultant cellulose loaded PVA film (CPF) was employed as a positive triboelectric material to design a coin-cell type TENG, whereas the Kapton was used as a negative material. Design of such TENG using CPF can reduce the processing cost and is also significant to incorporate the waste cotton into an energy harvesting device. Besides, the effect of electrical output performance of CPF-based prototype TENG (CPF- p TENG) as a function of the concentration of MCC particles loaded into PVA was also systematically studied and optimized. Thus, the CPF- p TENG with the 2.5 wt% of cellulose added into PVA exhibited a stable and high electrical output. The electrical performance of CPF- p TENG was further enhanced by introducing the microarchitectures on the surface of CPF, and it exhibited comparatively very high voltage, current and power density values of ∼600 V, 50 μA and 84.5 W/m 2, respectively. Finally, to demonstrate the practical or commercial applications, a MACPF-based coin-cell type TENG (i.e., MACPF- cc TENG) was developed to harvest the mechanical energies available in daily human life by placing it under the human-foot medial arch, which can be further utilized as a self-power system to drive various portable electronics. Graphical abstract: Image 1 Highlights: We reported a dynamic conversion of squandered cotton into microarchitectured triboelectric films with low processing cost. Using these films, a coin-cell type TENG was fabricated, which exhibited a high and durable electrical output. Such coin-cell type TENG was placed under medial arch of human foot to harvest various human actions. Human foot medial arch was first time proposed as the perfect location for the coin-cell type TENG. It also employed as a self-powered system to drive various portable electronics.