Effect of process parameters on ice crystals and air bubbles size distributions of sorbets in a scraped surface heat exchanger. (August 2018)

• Record Type: Journal Article
• Authors: Parra, Oscar Darío Hernández; Ndoye, Fatou-Toutie; Benkhelifa, Hayat; Flick, Denis; Alvarez, Graciela
• Is Part Of: International journal of refrigeration. Volume 92(2018)
• Page Start: 225
• Page End: 234
• Publication Date: 2018-08
• Subjects: Sorbet -- Ice crystal size -- Bubble size -- Air flowrate -- Low-temperature microscopy -- Scraped surface heat exchanger; Sorbet -- Taille des cristaux de glace -- Taille des bulles -- Débit d'air -- Microscopie à basse température -- Échangeur thermique à surface raclée; Refrigeration and refrigerating machinery -- Periodicals; 621.56
• DOI: 10.1016/j.ijrefrig.2018.02.013
• Languages: English
• ISSNs: 0140-7007

Abstract

Highlights: A low-temperature microscopy method was developed for crystals and bubbles size measurement. The influences of refrigerant fluid temperature and air flowrate were investigated. Lowering refrigerant fluid temperature decreased ice crystals and air bubbles sizes. Increasing air flowrate reduces ice crystals size. Changes in air flowrate have a slight impact on air bubbles size. Abstract: Ice crystals and bubbles size distributions were characterized for aerated sorbets produced during a crystallization-foaming process in a scraped surface heat exchanger. Size measurements were performed immediately at the exit of the heat exchanger by means of a low-temperature microscopy method especially developed in order to discriminate between ice crystals and bubbles and to make possible to measure both sizes simultaneously. The influence of process parameters such as refrigerant fluid evaporating temperature and air flowrate on both size distributions was investigated. Larger ice crystals were obtained when refrigerant fluid temperature increased, but this effect was minimized by the presence of air which retards crystal growth by insulation and hindrance effect. Low refrigerant fluid temperature led to small air bubbles size because of the enhancement of bubbles breakup by shear forces. Ice crystals size was reduced when air flowrate was increased, even if the effect was less pronounced at the lower refrigerant fluid temperature. Variations on air flowrate had a very small effect on air bubbles size.