Optimum parameters of a five-story building supported by lead-rubber bearings under near-fault ground motions. Issue 1 (March 2020)

• Record Type: Journal Article
• Authors: Rong, Qiang
• Is Part Of: Journal of low frequency noise, vibration, and active control. Volume 39:Issue 1(2020)
• Page Start: 98
• Page End: 113
• Publication Date: 2020-03
• Subjects: Base isolation -- near-fault ground motion -- lead-rubber bearings isolation system -- yield shear coefficient -- stiffness ratio -- yield displacement -- second isolation period; Vibration -- Periodicals; Noise -- Periodicals; Sound -- Periodicals; Damping (Mechanics) -- Periodicals; Damping (Mechanics); Noise; Sound; Vibration; Periodicals; 620.205
• DOI: 10.1177/1461348419845829
• Languages: English
• ISSNs: 1461-3484

Abstract

Seismic response of five-story frame structure supported by lead-rubber bearings isolation system is investigated subjected to near-fault ground motions. The main structure is modeled as a simple linear multi-degrees-of-freedom vibration system with lumped masses, excited by near-fault ground motions in the horizontal direction. The variation curves of peak top floor acceleration and peak bearing displacement of isolated building are plotted under different yield shear coefficient. The objective function selected for optimality is to maximize the seismic energy dissipated by the lead-rubber bearings. The main constraint conditions selected for optimality are the minimization of both peak bearing displacement and peak top floor acceleration. Optimum parameters of lead-rubber bearing isolation system are investigated and found that optimum yield shear coefficient of lead-rubber bearings is found to be in the range of 0.10–0.14 under near-fault ground motions. Optimum yield shear coefficient decreases with the increase of second isolation period. Optimum yield shear coefficient of lead-rubber bearings with higher yield displacement is larger than that of lead-rubber bearings with low yield displacement. Optimum ratio of pre-yield stiffness to post-yield stiffness of lead-rubber bearings is found to be in the range of 16–35. Optimum stiffness ratio increases proportionally with the decrease of yield displacement. Optimum stiffness ratio increases slightly with the increase of yield shear coefficient. Excluding the effect of pre-yield stiffness, the optimum second isolation period is recommended to be in the range of 4–6 s.