Hydrogen quality sampling at the hydrogen refuelling station – lessons learnt on sampling at the production and at the nozzle. (14th February 2020)

• Record Type: Journal Article
• Authors: Bacquart, Thomas; Moore, Niamh; Hart, Nick; Morris, Abigail; Aarhaug, Thor A.; Kjos, Ole; Aupretre, Fabien; Colas, Thibault; Haloua, Frederique; Gozlan, Bruno; Murugan, Arul
• Is Part Of: International journal of hydrogen energy. Volume 45:Number 8(2020)
• Page Start: 5565
• Page End: 5576
• Publication Date: 2020-02-14
• Subjects: Hydrogen -- ISO14687 -- Gas analysis -- Gas sampling -- Hydrogen refuelling station -- Hydrogen quality; Hydrogen as fuel -- Periodicals; Hydrogène (Combustible) -- Périodiques; Hydrogen as fuel; Periodicals; 665.81
• DOI: 10.1016/j.ijhydene.2019.10.178
• Languages: English
• ISSNs: 0360-3199

Abstract

Abstract: Fuel cell electric vehicles and hydrogen refuelling infrastructure are developing quickly in Europe, the USA and Asia. Hydrogen quality for transport applications requires compliance with ISO 14687-2: 2012 and EN 17124:2018 - this needs representative sampling, at the hydrogen production process and at hydrogen dispenser nozzle (which typically fill vehicles to a Nominal Working Pressure of either 35 or 70 MPa). The low thresholds in ISO 14687-2 for oxygen and water can be exceeded if the sampling procedure fails to purge the system sufficiently, which would lead to false results (60% in this study). Purging requirements to remove water were studied using a low pressure sampling rig. For hydrogen dispenser sampling using the Linde H2 Qualitizer (suitable for dispensing pressures up to 70 MPa), purging number and the effect of the initial fill level of a vehicle compressed hydrogen storage system were investigated experimentally to avoid hydrogen quality violation due to oxygen false positive. The study procedure reduces from 60% to 0% hydrogen quality violation. The next challenges highlighted are safe purging and reliable sampling of reactive contaminants in gas cylinders. Highlights: Recommendation on H2 fuel sampling for production process and H2 refuelling station. Experimental results on hydrogen contaminant purging procedure at hydrogen refuelling station. Contaminants (O2 and H2O) above ISO 14687 values due to improper sampling procedure. Linde H2 Qualitizer procedure allows H2 sampling at HRS (35&70 MPa NWP dispensers). H2 Qualitizer procedure suitable for reliable hydrogen sample (no air contaminant).