Microstructure and mechanical properties of welded joints of L415/316L bimetal composite pipe using post internal-welding process. (January 2020)

• Record Type: Journal Article
• Authors: Liying, Li; Jun, Xiao; Bin, Han; Xiaolei, Wang
• Is Part Of: International journal of pressure vessels and piping. Volume 179(2020)
• Publication Date: 2020-01
• Subjects: L415/316L bimetal mechanical lined pipe -- Post internal-welding process -- Microstructure -- Properties; Pressure vessels -- Periodicals; Pipe -- Periodicals; Récipients sous pression -- Périodiques; Tuyaux -- Périodiques; Pipe; Pressure vessels; Periodicals; 681.76041
• DOI: 10.1016/j.ijpvp.2019.104026
• Languages: English
• ISSNs: 0308-0161

Abstract

Abstract: In order to reduce the welding cost and improve welding quality, L415/316L bimetal mechanical lined pipes were welded using the post internal-welding process in which the outer carbon layer is welded prior to the inner stainless layer. The mechanical property tests, such as tensile, bending and hardness tests, of the welded joints were carried out. Microstructure and the chemical compositions of the welded joints were analyzed by optical microscope (OM), scanning electron microscope (SEM), electron backscattered diffraction (EBSD) and electron probe microscope analysis (EPMA). In addition, the pitting corrosion resistance of the welded joints was evaluated. The results show that the mechanical properties of the welded joints do meet the standard requirements. The cracks on the bending specimens are closely related to the martensite formed at ER309 L/ER70S-6 or ER309 L/L415 interface. In addition, pitting holes are found in the ferric chloride solution showing that ER309MoL welding wire is not suitable for welding 316L layer. From the perspective of mechanical properties, it is advisable to use the post internal-welding process for the welding of bimetal composite pipes. Highlights: The post internal-welding process is proposed by the authors in which the outer carbon layer is welded prior to the inner stainless layer. The tensile and bending properties of the welded joints using post internal-welding process do meet the standard requirements. The cracks on the bending specimens are closely related to the martensite formed at ER309L/ER70S-6 or ER309L/L415 interface. There were a large amount of large corrosion pits in the ER309L weld, so ER309MoL welding wire is not suitable for welding 316L layer.