A stable and high-energy hybrid supercapacitor using porous Cu2O–Cu1.8S nanowire arrays. Issue 4 (6th January 2020)

• Record Type: Journal Article
• Authors: Esfandiar, Ali; Qorbani, Mohammad; Shown, Indrajit; Ojaghi Dogahe, Badrosadat
• Is Part Of: Journal of materials chemistry. Volume 8:Issue 4(2020)
• Page Start: 1920
• Page End: 1928
• Publication Date: 2020-01-06
• Subjects: Materials -- Research -- Periodicals; Chemistry, Analytic -- Periodicals; Environmental sciences -- Research -- Periodicals; 543.0284
• DOI: 10.1039/c9ta12675a
• Languages: English
• ISSNs: 2050-7488

Abstract

Abstract : The capacitance of Cu2 O–Cu1.8 S nanowires decorated with Cu1.8 S polyhedra can reach 2.6 F cm −2 with a prominent rate capability of 62% at 80 mA cm −2 . Abstract : A three-dimensional electrode based on porous Cu2 O–Cu1.8 S nanowires is prepared by means of a facile fabrication process. In this electrode, nanowires are decorated with Cu1.8 S polyhedral nanostructures on the top, which are directly grown on a copper foam, thereby eliminating the need for a polymer binder. As an electrochemical electrode, it exhibits an extrinsic pseudocapacitive charge storage mechanism, which is different from that of battery-like Cu2 O–CuO and Cu(OH)2 electrodes. The areal and volumetric capacitances of the Cu2 O–Cu1.8 S electrode can reach 2.6 F cm −2 and ∼200 F cm −3, respectively, at 2 mA cm −2, which are much higher than those obtained using copper(i, ii ) oxide and hydroxide phases. An asymmetric hybrid supercapacitor device shows areal and volumetric energy densities of 204.8 μW h cm −2 and ∼2.1 mW h cm −3, respectively, at a power density of 3.1 mW cm −2 with a retention ratio of 55% at 15.5 mW cm −2 . Besides, both the Cu2 O–Cu1.8 S electrode and the asymmetric hybrid supercapacitor device exhibit remarkable long-term cycling stabilities, with the capacitance retention of 91% and 94% after 15 000 cycles at the current densities of 40 and 20 mA cm −2, respectively. The porous copper sulfide phase in the fabricated electrode provides a reservoir of ions close to the surface, reducing the diffusion path lengths of ions into the electroactive solid network; this induces an improved electrochemical pseudocapacitive behavior. Our findings shed light on the role of surface modification for creating stable energy storage devices and present a simple way using cost-effective materials to generate more accessible active sites for charge storage on nanostructured electrodes.