Cooperative load‐bearing characteristics of a pillar group and a gob pile in partially caved areas at shallow depth. Issue 1 (12th November 2019) - Zhu, Defu
Abstract: Stress concentration in partially caved goaf is the main cause of dynamic pressure accident in the lower seam mining. Aimed at the characteristics of caving in shallow partially caved goaf (PCG) and the specificity of interior load‐bearing structures, a classification criterion of goaf caving was proposed. The characteristics of cooperative load‐bearing in pillar group and gob pile were revealed by numerical calculation, physical simulation, and theoretical analysis. Taking intermittent mining as an example, combined with the deformation behaviors of the main roof and the loading characteristics of waster rock mass, the characteristics of the load‐bearing of gob piles were described in the form of a piecewise function. A FLAC3D model of intermittent mining is modeled to evaluate the stability of pillars, the long‐term stability and distribution laws of overlying loads were revealed through a refined model. The results show that the width of the caved zone bearing the load in the intermittent goaf is about 20 m, and the maximum load‐bearing capacity is 1.055 MPa. The maximum depth of the plastic region in one side of the pillar is 1.48 m, and the load on elastic zone is about 11.33 MPa. This study provides a method for the study of the caving characteristics and load uncertainty in PCG, and the results provide important theoretical values for the safe mining of lower coal seams. Abstract : Definition of the PCG (partially caved goaf) and analysis of the bearing structure in goaf. Modeling and calculation the Load‐bearing characteristics of broken rock mass. Stability of pillars and cooperative load‐bearing characteristics of pillar group–gob pile in PCG are revealed by large‐scale numerical models (3DEC and FLAC3D).