Simultaneous reduction of nitric oxide and smoke opacity in TDI dual fuel engine fuelled with calophyllum-diesel blends and waste wood chip gas for modified inlet valve and injector nozzle geometry. (15th December 2019)

• Record Type: Journal Article
• Authors: Nayak, Swarup Kumar; Mishra, Purna Chandra; Noor, Muhamad Mat
• Is Part Of: Energy. Volume 189(2019)
• Publication Date: 2019-12-15
• Subjects: Calophyllum inophyllum -- Babul wood -- Inlet valve mask angle -- Nozzle geometry -- Nitrogen oxide -- Smoke opacity; Power resources -- Periodicals; Power (Mechanics) -- Periodicals; Energy consumption -- Periodicals; 333.7905
• DOI: 10.1016/j.energy.2019.116238
• Languages: English
• ISSNs: 0360-5442

Abstract

Abstract: The present paper briefly elaborates the influence of inlet valve masking (IVM) and nozzle hole configuration on performance, emission and combustion behaviour of a single cylinder water cooled turbo-charged engine fuelled with Calophyllum inophyllum as injected fuel and babul wood chip generated producer gas from a downdraft gasifier as inducted fuel with modified mask angle and nozzle hole configuration keeping compression ratio, speed, injection parameters constant. Experimental results depicted a lower brake thermal efficiency of (2.1%↓ and 3.3%↓) and exhaust gas temperature of (50.3%↓ and 49.6%↓) with increased specific fuel consumption by (3.7%↑ and 4.3%↑) for IVM-90 and 4-hole nozzle. Considering emission characteristics, smoke opacity and nitric oxide were reduced by (42.7%↓ and 48.1%↓) for IVM-90 and (32.4%↓ and 41.7%↓) for 4-hole nozzle, with a marginal increment in carbon monoxide and hydrocarbon by (16.6%↑ and 4.5%↑) for IVM-90, while (16.7%↑ and 6.7%↑) for 4-hole nozzle. Moreover, heat release rate and cylinder pressure were on higher side in contrast to diesel injected single fuel mode. Hence, introduction of valve mask and modified nozzle hole with inducted gaseous fuel in dual fuel mode has proven to be effective in enhancing engine performance and combustion characteristics, thereby reducing emission levels. Highlights: Influence of varying nozzle hole configuration and inlet valve mask angles were investigated. CIME 20 showed better physio-chemical properties in contrast to diesel fuel. Prepared blends with 4 hole nozzle and 90° mask angle provides efficient engine performance. Prepared blends produced lower BTE by 2.1%↓ than Diesel-Producer gas. NO and smoke with 4 hole nozzle and 90° mask angle upon TrCC reduced by 48.1%↓ and 42.7%↓.