Cypermethrin elimination using Fe-TiO2 nanoparticles supported on coconut palm spathe in a solar flat plate photoreactor. (6th February 2020) - Solano Pizarro, Ricardo Andrés
In this research, the photocatalytic degradation of cypermethrin using iron-titanium dioxide (Fe-TiO2 ) nanoparticles supported in a biomaterial was evaluated. The nanoparticles of TiO2 were synthesized by the green chemistry method assisted by ultrasound and doped by chemical impregnation using Fe +3 :Ti molar ratios of 0, 0.05, 0.075 and 0.1 to make efficient use of direct sunlight ( λ > 310 nm). All nanoparticles were immobilized on the surface of coconut spathe ( Cocos nucifera ). The degradation was carried out at room temperature and natural pH in a flat plate solar reactor, on which the composite material was subjected. The concentration of cypermethrin was determined after 12, 000 J m −2 of accumulated radiation from gas chromatography–mass spectrometry and the resulting material was characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, ultraviolet–visible diffuse reflectance spectroscopy, and Brunauer-Emmett-Teller (BET) surface area. The best results were achieved with the use of Evonik TiO2 P-25, Fe:Ti = 0 and Fe:Ti = 0.05 in suspension, with percentages of degradation of cypermethrin of 99.84%, 99.62%, and 100%, respectively. However, the materials supported on the biomaterial of coconut allowed to reach degradation percentages higher than 80%, with the advantage that it minimizes operating costs, as they are not necessarily filtering or centrifuging processes to separate the catalyst.