A Numerical Investigation into the Heat Transfer and Melting Process of Lauric Acid in a Rectangular Enclosure with Three Values of Wall Heat Flux. (February 2019)

• Record Type: Journal Article
• Authors: Fadl, Mohamed; Eames, Philip
• Is Part Of: Energy procedia. Volume 158(2019)
• Page Start: 4502
• Page End: 4509
• Publication Date: 2019-02
• Subjects: Melting -- PCM -- Wall heat flux -- Rectangular enclosure; Power resources -- Congresses; Power resources -- Periodicals; Power resources; Conference proceedings; Periodicals; 333.7905
• DOI: 10.1016/j.egypro.2019.01.761
• Languages: English
• ISSNs: 1876-6102

Abstract

Abstract: A numerical study of melting of Lauric acid in a vertical rectangular cross-section enclosure was performed with FLUENT 18.2. The enclosure was subject to a constant heat flux on one side of 500, 750 and 1000 W/m 2 . For model validation purposes simulations were initially performed of experimental systems in the literature with predicted values compared to experimental measurements. Predictions indicate that during the initial stage of melting, conduction is the dominant mode of heat transfer, subsequently replaced by convection when there is sufficient liquid PCM. The simulations show that as the magnitude of heat flux is increased, average wall temperature increases and melting time reduces. The predicted results indicated that melting time decreases by 28.5 % as the wall flux increases by 50 % from 500 to 750 W/m 2 . The time required for melting reduces by about 50% when the wall heat flux is increased from 500 to 1000 W/m 2 .