Detection of sub-surface damage in wind turbine bearings using acoustic emissions and probabilistic modelling. (March 2020)

• Record Type: Journal Article
• Authors: Fuentes, R.; Dwyer-Joyce, R.S.; Marshall, M.B.; Wheals, J.; Cross, E.J.
• Is Part Of: Renewable energy. Volume 147(2020)Part 1
• Page Start: 776
• Page End: 797
• Publication Date: 2020-03
• Subjects: Acoustic Emission -- Condition monitoring -- Bearings -- Damage detection -- Probabilistic modelling -- Wind turbines; Renewable energy sources -- Periodicals; Power resources -- Periodicals; Énergies renouvelables -- Périodiques; Ressources énergétiques -- Périodiques; 333.794
• DOI: 10.1016/j.renene.2019.08.019
• Languages: English
• ISSNs: 0960-1481

Abstract

Abstract: Bearings are the culprit of a large quantity of Wind Turbine (WT) gearbox failures and account for a high percentage of the total of global WT downtime. Damage within rolling element bearings have been shown to initiate beneath the surface which defies detection by conventional vibration monitoring as the geometry of the rolling surface is unaltered. However, once bearing damage reaches the surface, it generates spalling and quickly drives the deterioration of the entire gearbox through the introduction of debris into the oil system. There is a pressing need for performing damage detection before damage reaches the bearing surface. This paper presents a methodology for detecting sub-surface damage using Acoustic Emission (AE) measurements. AE measurements are well known for their sensitivity to incipient damage. However, the background noise and operational variations within a bearing necessitate the use of a principled statistical procedure for damage detection. This is addressed here through the use of probabilistic modelling, more specifically Gaussian mixture models. The methodology is validated using a full-scale rig of a WT bearing. The bearings are seeded with sub-surface and early-stage surface defects in order to provide a comparison of the detectability at each level of a fault progression. Highlights: Detection of incipient damage in wind turbine bearings is investigated. Acoustic Emission measurements are used in practical sensing locations. . A detection framework based on probabilistic modelling is presented. Methodology is validated on an experimental rig representative of true operation.