Performance estimation of ejector cycles using ethers and fluorinated ethers as refrigerants. (25th March 2018)

• Record Type: Journal Article
• Authors: Gil, Bartosz; Kasperski, Jacek
• Is Part Of: Applied thermal engineering. Volume 133(2018)
• Page Start: 269
• Page End: 275
• Publication Date: 2018-03-25
• Subjects: Ejector -- Hydrofluoroethers -- Entrainment ratio -- Estimation; Heat engineering -- Periodicals; Heating -- Equipment and supplies -- Periodicals; Periodicals; 621.40205
• DOI: 10.1016/j.applthermaleng.2018.01.061
• Languages: English
• ISSNs: 1359-4311

Abstract

Highlights: The advantages of using ethers and fluorinated ethers as refrigerants were shown. Computer software based on the 1-D model of Huang et al. (1999) was prepared. The optimal temperature range of primary vapor for each refrigerant was calculated. Abstract: Computer software, based on the theoretical model of Huang et al. (1999) with thermodynamic properties of selected refrigerants, was prepared. The investigation was focused on alternative refrigerants that belong to the groups of ethers and fluorinated ethers. The main purpose of the paper was to check the possibility of co-operating the above substances with an ejector cooling system powered by a high-temperature heat source. A series of calculations were carried out for the generator temperature from 60 °C to 165 °C, with assumed temperatures of evaporation of 10 °C and condensation of 40 °C. The analysis revealed that there is no single refrigerant that ensures the efficient operation of the system in the whole range of primary vapor temperatures. Each substance has its own maximum entrainment ratio and COP at its individual optimum temperature. The maximum COP values were obtained for dimethyl ether and diethyl ether, and reached 0.30 and 0.25 respectively.