Desalination processes evaluation at common platform: A universal performance ratio (UPR) method. (April 2018)

• Record Type: Journal Article
• Authors: Wakil Shahzad, Muhammad; Burhan, Muhammad; Soo Son, Hyuk; Jin Oh, Seung; Choon Ng, Kim
• Is Part Of: Applied thermal engineering. Volume 134(2018)
• Page Start: 62
• Page End: 67
• Publication Date: 2018-04
• Subjects: Desalination -- Performance ratio -- Exergy analysis -- Sustainability -- Universal performance ratio; AD adsorption -- CC combustion chamber -- CW cooling water -- CCGT combined cycle gas turbine -- CF conversion factor -- GCC Gulf Cooperation Council -- GT GAS turbine -- HRSG heat recovery steam generator -- HW hot water -- HP high pressure -- IEO international energy outlook -- LP low pressure -- LBT lower brine temperature -- MP medium pressure -- MED multi effect desalination -- MSF multi stage flash -- MW megawatt -- OECD organization for economic cooperation and development -- PR performance ratio -- RO reverse osmosis -- ST steam turbine -- TL thermodynamic limit -- TBT top brine temperature -- UPR universal performance ratio; Heat engineering -- Periodicals; Heating -- Equipment and supplies -- Periodicals; Periodicals; 621.40205
• DOI: 10.1016/j.applthermaleng.2018.01.098
• Languages: English
• ISSNs: 1359-4311

Abstract

Highlights: Universal performance ratio (UPR) is a common platform to evaluate all kind of desalination technologies. In combined cycle arrangements, thermally driven desalination processes only consume 3–5% of primary fuel exergy. All conventional desalination processes are operating at only 10–13% of theoretical limit. The sustainable desalination can only be achieved by approaching 25–30% of theoretical limit. The current hybrid cycles can achieve up-to 20% of theoretical limit, one of the best reported up-till now. Abstract: The inevitable escalation in economic development have serious implications on energy and environment nexus. The International Energy Outlook 2016 (IEO2016) predicted that the Non Organization for Economic Cooperation and Development (non-OECD) countries will lead with 71% rise in energy demand in contrast with only 18% in developed countries from 2012 to 2040. In Gulf Cooperation Council (GCC) countries, about 40% of primary energy is consumed for cogeneration based power and desalination plants. The cogeneration based plants are struggling with unfair primary fuel cost apportionment to electricity and desalination. Also, the desalination processes performance evaluated based on derived energy, providing misleading selection of processes. There is a need of (i) appropriate primary fuel cost appointment method for multi-purposed plants and (ii) desalination processes performance evaluation method based on primary energy. As a solution, we proposed exergetic analysis for primary fuel percentage apportionment to all components in the cycle according to the quality of working fluid utilized. The proposed method showed that the gas turbine was under charged by 40%, steam turbine was overcharged by 71% and desalination was overcharged by 350% by conventional energetic apportionment methods. We also proposed a new and most suitable desalination processes performance evaluation method based on primary energy, called universal performance ratio (UPR). Since UPR is based on primary energy, it can be used to evaluate any kind of desalination processes, thermally driven, pressure driven & humidification-dehumidification etc. on common platform. We showed that all desalination processes are operating only at 10–13% of thermodynamic limit (TL) of UPR. For future sustainability, desalination must achieve 25–30% of TL and it is only possible either by hybridization of different processes or by innovative membrane materials.